KIT-BRUSH 8T9885 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The engine can have the ability to auto start. Ensure that the power supply is isolated before any service or repairs is performed.
Turn the fuel supply to the OFF position.
Illustration 1 g01684053
Disconnect harness assemblies (1) from water seperator switch (4).
Use Tooling (A) to remove fuel filter bowl (2).
Remove O-ring seals (3) from bowls (2).
Remove the fuel filters. Refer to Operation and Maintenance Manual, "Fuel System Primary Filter (MCS) - Replace". Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the water seperator switch are clean and free from damage.
Illustration 2 g01684053
Install new O-ring seals (3) to the bowl of fuel filters (2). Refer to Operation and Maintenance Manual, "Fuel System Primary Filter (MCS) - Replace".
Install bowl (2) to the filters.
Connect harness assemblies (1) to water seperator switch (4).
Remove the air from the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime" for more information.