8U3888 KIT-REPAIR Caterpillar parts
213B, 214B, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
Rating:
Alternative (cross code) number:
CA8U3888
8U-3888
8U3888
CA8U3888
8U-3888
8U3888
Weight: 0.22 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 8U3888:
Information:
Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     189-0409     Shackle As     2    
Illustration 13 g01431668
Attach Tooling (A) and a suitable lifting device to conveyor assembly (18). The weight of conveyor assembly (18) is approximately 980 kg (2160 lb). Install conveyor assembly (18) to the machine.
Illustration 14 g01431666
Install the conveyor until the chains are against the frame. Lower the rear of conveyor assembly (18) onto the frame. Lower the front of conveyor assembly (18) onto a suitable stand.
Illustration 15 g01431667
Attach a suitable lifting device to the rear of conveyor assembly (18). Raise conveyor assembly (18) off the frame and the suitable stand. Continue installing conveyor assembly (18) .
Illustration 16 g01431665
Align link (21) to the frame. Install pin (20), the washers, and the cotter pin. Install the pin, the washers, and the cotter pin to the other side of the conveyor.
Remove Tooling (A) from conveyor assembly (18) .
Illustration 17 g01431664
Install pin assembly (19), the washer, and the bolt.
Illustration 18 g01431661
Remove the suitable lifting device from conveyor assembly (18) .
Illustration 19 g01432285
Connect hose assemblies (13), (14), (16), and (17) to gerotor motor (15). Install the hose assemblies to the other gerotor motor on the right side of the conveyor.
Illustration 20 g01431660
Install conveyor return idler (12) and bolts (11) .
Illustration 21 g01431659
Install hose assembly (5), the clamps, and bolts (10). Tighten bolts (10) after the hose assembly in Step 11 is connected.
Illustration 22 g01431658
Install water spray group (8) and bolts (9) to the left side of the conveyor.
Connect hose assemblies (5) .
Illustration 23 g01431657
Install water spray group (7) and bolts (6) to the right side of the conveyor.
Connect hose assemblies (4) and (5) .
Install harness assembly (2) and the cable straps.
Illustration 24 g01431656
Install backup control group (1) and bolts (3) .
Connect harness assembly (2) .End By:
Install the fuel and water tank assembly. Refer to Disassembly and Assembly, "Fuel and Water Tank - Remove and Install".
Install the hydraulic cylinder (conveyor lift). Refer to Disassembly and Assembly, "Hydraulic Cylinder (Conveyor Lift) - Remove and Install".
Install the second stage conveyor. Refer to Disassembly and Assembly, "Second Stage Conveyor - Remove and Install".
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     189-0409     Shackle As     2    
Illustration 13 g01431668
Attach Tooling (A) and a suitable lifting device to conveyor assembly (18). The weight of conveyor assembly (18) is approximately 980 kg (2160 lb). Install conveyor assembly (18) to the machine.
Illustration 14 g01431666
Install the conveyor until the chains are against the frame. Lower the rear of conveyor assembly (18) onto the frame. Lower the front of conveyor assembly (18) onto a suitable stand.
Illustration 15 g01431667
Attach a suitable lifting device to the rear of conveyor assembly (18). Raise conveyor assembly (18) off the frame and the suitable stand. Continue installing conveyor assembly (18) .
Illustration 16 g01431665
Align link (21) to the frame. Install pin (20), the washers, and the cotter pin. Install the pin, the washers, and the cotter pin to the other side of the conveyor.
Remove Tooling (A) from conveyor assembly (18) .
Illustration 17 g01431664
Install pin assembly (19), the washer, and the bolt.
Illustration 18 g01431661
Remove the suitable lifting device from conveyor assembly (18) .
Illustration 19 g01432285
Connect hose assemblies (13), (14), (16), and (17) to gerotor motor (15). Install the hose assemblies to the other gerotor motor on the right side of the conveyor.
Illustration 20 g01431660
Install conveyor return idler (12) and bolts (11) .
Illustration 21 g01431659
Install hose assembly (5), the clamps, and bolts (10). Tighten bolts (10) after the hose assembly in Step 11 is connected.
Illustration 22 g01431658
Install water spray group (8) and bolts (9) to the left side of the conveyor.
Connect hose assemblies (5) .
Illustration 23 g01431657
Install water spray group (7) and bolts (6) to the right side of the conveyor.
Connect hose assemblies (4) and (5) .
Install harness assembly (2) and the cable straps.
Illustration 24 g01431656
Install backup control group (1) and bolts (3) .
Connect harness assembly (2) .End By:
Install the fuel and water tank assembly. Refer to Disassembly and Assembly, "Fuel and Water Tank - Remove and Install".
Install the hydraulic cylinder (conveyor lift). Refer to Disassembly and Assembly, "Hydraulic Cylinder (Conveyor Lift) - Remove and Install".
Install the second stage conveyor. Refer to Disassembly and Assembly, "Second Stage Conveyor - Remove and Install".
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
1184131
KIT-SEAL
315B L, 317B LN, 318B, 320B, M320
315B L, 317B LN, 318B, 320B, M320
1799625
KIT-SEAL
315C, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, M318C, M318C MH, M318D, M318D MH, M322D, M322D MH
315C, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, M318C, M318C MH, M318D, M318D MH, M322D, M322D MH
2159986
KIT-SEAL
320B, 320C, 322B LN, 322C, 324D, 324D FM, 324D L, 324D LN, 325C, 345B II, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, M318C, M318C MH, M318D, M318D MH, M325C MH, M325D L MH
320B, 320C, 322B LN, 322C, 324D, 324D FM, 324D L, 324D LN, 325C, 345B II, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, M318C, M318C MH, M318D, M318D MH, M325C MH, M325D L MH
2580504
KIT-SEAL
M318C, M318C MH, M318D, M318D MH
M318C, M318C MH, M318D, M318D MH
2000920
KIT-SEAL
M316C, M316D, M318C, M318D, M318D MH
M316C, M316D, M318C, M318D, M318D MH
2101330
KIT-SEAL
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
2580500
KIT-SEAL
M316C, M316D, M322C, M322D, M322D MH, M325C MH, M325D MH
M316C, M316D, M322C, M322D, M322D MH, M325C MH, M325D MH
2366368
KIT-SEAL
318C, 319C, 319D, 319D L, 319D LN, 320B, 320C, 325B L, 325C, 325D, 329D L, 330B L, 330C, 345B II, 345B L, M322C, M322D, M322D MH
318C, 319C, 319D, 319D L, 319D LN, 320B, 320C, 325B L, 325C, 325D, 329D L, 330B L, 330C, 345B II, 345B L, M322C, M322D, M322D MH
2868866
KIT-GLASS
312C, 312D, 315C, 315D L, 319C, 319D, 320C, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D,...
312C, 312D, 315C, 315D L, 319C, 319D, 320C, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D,...
2868867
KIT-GLASS
312C, 312D, 315C, 315D L, 319C, 319D, 320C, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D,...
312C, 312D, 315C, 315D L, 319C, 319D, 320C, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D,...
2159985
KIT-SEAL
1390, 320B, 320C, 322B LN, 322C, 325C, 325C FM, 325D, 325D FM, 325D L, 330C, 330C MH, 330D L, 330D MH, 336D LN, 345B II, 345C L, 365B, 365B II, 365C, 365C L, 385B, 385C L, 541, 551, 552, M322C, M322D,...
1390, 320B, 320C, 322B LN, 322C, 325C, 325C FM, 325D, 325D FM, 325D L, 330C, 330C MH, 330D L, 330D MH, 336D LN, 345B II, 345C L, 365B, 365B II, 365C, 365C L, 385B, 385C L, 541, 551, 552, M322C, M322D,...
1997427
KIT-SEAL
325B L, M320
325B L, M320
1183110
KIT-SEAL
M318
M318
1208128
KIT-SEAL
M312, M315, M318, M320
M312, M315, M318, M320
2605317
KIT-SEAL
M315, M318
M315, M318
1247005
KIT-SEAL
M318
M318
2580501
KIT-SEAL
M318
M318
1183135
KIT-SEAL
M315D, M316C, M316D, M318, M318C, M318D
M315D, M316C, M316D, M318, M318C, M318D
5W6040
KIT-SEAL REPAIR
205, 206, 206B, 212, 212B, M312, M315, M318, M320
205, 206, 206B, 212, 212B, M312, M315, M318, M320
1279651
KIT-SEAL
M315, M318, M320
M315, M318, M320
1219739
KIT-REPAIR
539, M312, M315, M318, M320
539, M312, M315, M318, M320
1229342
KIT-SEAL
M318
M318
1229046
KIT-SEAL
M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH
M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH
1688139
KIT-REPAIR
M318, M320
M318, M320