KIT-SEAL 8X0495 - Caterpillar

1. Fasten a lifting sling and a hoist to the axle housing, as shown. Remove nuts (1). Remove axle housing (2). The weight of axle housing (2) is 293 kg (646 lb). The following steps are for the installation of the axle housings. The surfaces of the axle housing and the machine frame must be clean and free of nicks, a leak could result.2. Fasten a lifting sling and a hoist, and put axle housing (2) in position on the scraper frame.3. Put 4C-5593 Thread Compound on the faces of the washers and the threads of the studs. Install nuts (1) that hold the axle housing in place. Tighten nuts (1) to a torque of 470 30 N m (350 22 lb ft).End By:a. install brake camshaft and slack adjusterb. install brake shoesc. install wheels, bearings and Duo-cone seals