KIT (seal) 9J4014 - Caterpillar

Illustration 1 g03620016
Table 1
Specification for 374-2285 Ripper Cylinder Gp
Item Qty Part Specification Description
1 2 3J-6484 Bushing Bore before assembly is 76.708 0.013 mm (3.0200 0.0005 inch).
Installation depth is 10.4 0.5 mm (0.41 0.02 inch).
2 1 2J-7686 Locknut Before assembly, lubricate the threads.
Torque to 6500 650 N m (4794 479 lb ft).
A 1 376-3085 Cylinder As Bore is 180.00 0.10 mm (7.087 0.004 inch).
B 1 376-3089 Rod As Diameter is 89.930 0.038 mm (3.5405 0.0015 inch).
C 1 380-1600 Head Bore over four lands is 90.28 0.03 mm (3.554 0.001 inch).
3 8 8T-0667 Bolt Torque to 900 100 N m (664 74 lb ft).
4 2 3J-6484 Bushing Bore before assembly is 76.708 0.013 mm (3.0200 0.0005 inch).
Installation depth is 9.6 0.5 mm (0.38 0.02 inch).
5 1 186-5397 Wear Ring Bore before assembly is 90.0 mm (3.54 inch).
6 1 167-2212 Buffer Seal As Lubricate the sealing lip lightly with the lubricant that is being sealed.
7 1 167-2325 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
8 1 282-9598 Wiper Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
9 - - Before assembly, apply green Loctite 609 to the wiper seal groove.