KIT-BIAS PISTON 9T3014 - Caterpillar

Illustration 65 g02580416
Illustration 66 g02580458
Connect harness assemblies (18). Install clips (17). Connect hose assemblies (16) .
Illustration 67 g01403247
Illustration 68 g01403246
Install brackets (15) .
Illustration 69 g02580297
Connect tube assembly (14). Connect hose assembly (13). Install cable straps (12) .
Illustration 70 g02580217
Use Tooling (A) and a suitable lifting device to install support (9). The weight of support (9) is approximately 109 kg (240 lb).
Illustration 71 g02580258
Illustration 72 g02580278
Install bolts (11). Install cable straps (10).
Illustration 73 g02580358
Install clips (8) .
Illustration 74 g01403219
Install ether injector assembly (6). Connect harness assemblies (7) .
Illustration 75 g01403218
Install panel (5) .
Illustration 76 g02580156
Illustration 77 g01403217
Use Tooling (A) and a suitable lifting device to install support (3). The weight of support (3) is approximately 109 kg (240 lb). Install bolts (4) .
Illustration 78 g01403158
Install clips (2) .
Illustration 79 g01403160
Install panel (1). Repeat this step for the opposite side of the machine.
Fill the brake oil cooler. Refer to Operation and Maintenance Manual, "Hydraulic System Oil (Brake Cooling) - Change".
Fill the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Oil Filter - Change".End By:
Install the rear drive shaft. Disassembly and Assembly, "Drive Shaft (Rear) - Remove and Install"
Install the hood. Refer to Disassembly and Assembly, "Hood - Install".
Install the power train guard. Refer to Disassembly and Assembly, "Powertrain Guard - Install".
Install the radiator and the guard. Refer to Disassembly and Assembly, "Radiator and Guard - Install".