KNIFE-CUT OUT 1219778 - Caterpillar

Removal Procedure
Start By:
Remove the storage box and covers. Refer to Disassembly and Assembly, "Storage Box and Covers (Cab) - Remove and Install".
Illustration 1 g01430330
Disconnect harness assemblies (1). Disconnect harness assembly (4) from clips (3). Remove bolts (2) and position support assembly (5) and harness assembly (4) to the side.
Illustration 2 g01430338
Remove cover (6).
Illustration 3 g01430340
Loosen bolts (7). Disconnect harness assembly (9). Remove bolts (10) and blower motor (8). Installation Procedure
Illustration 4 g01430340
Position blower motor (8) and install bolts (10). Connect harness assembly (9). Tighten bolts (7).
Illustration 5 g01430338
Install cover (6).
Illustration 6 g01430330
Position support assembly (5) and harness assembly (4). Install bolts (2). Connect harness assembly (4) onto clips (3). Connect harness assembly (1). End By:
Install the storage box and covers. Refer to Disassembly and Assembly, "Storage Box and Covers (Cab) - Remove and Install".