KNOB 0971100 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-8622     Shackle As     2    
B     6V-6146     Load Leveler Gp     1    Start By:
Remove the implement and steering pump.
Remove the drive shaft.
Remove the refrigerant dryer.
Remove the radiator guard.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02848716
Disconnect hose assemblies (1) and hose assemblies (2) .
Illustration 2 g02848717
Disconnect hose assembly (3) .
Illustration 3 g02848718
Disconnect cable assembly (4) and cable assembly (5). Remove the connecting hardware.
Illustration 4 g02848719
Disconnect engine harness assemblies (6) and remove the connecting hardware.
Illustration 5 g02848720
Remove tube assembly (7) .
Illustration 6 g02848748
Disconnect hose assembly (8) and harness assemblies (9) .
Illustration 7 g02848746
Disconnect tube assembly (10) .
Illustration 8 g02848745
Remove tube (11) and tube assembly (12) .
Illustration 9 g02848751
Illustration 10 g02848752
Disconnect hose (13), hose assembly (14), and remove the connecting hardware.
Illustration 11 g02848754
Illustration 12 g02848755
Remove bolts (15). Remove bolts (16) and the caps. Repeat this step for the opposite side of the engine.
Illustration 13 g02848753
Use Tooling (A), Tooling (B), and a suitable lifting device to remove engine and torque converter (17). The weight of engine and torque converter (17) is approximately 1724 kg (3800 lb).