LABEL, NOTICE 1R7298 - Caterpillar

Illustration 12 g00666743
Remove five friction disks (17) from the travel motor housing.
Illustration 13 g00626837
Install Tooling (D) to the shaft and use a suitable lifting device in order to remove the rotating group from the travel motor housing. The weight of the rotating group is 29 kg (65 lb).Note: Do not allow the components of the rotating group to come apart during the removal from the travel motor. All of the components in the rotating group must be reinstalled in the component's original location.
Illustration 14 g00626633
Turn over the rotating group. Remove shaft assembly (18) from the rotating group.
Illustration 15 g00666621
Illustration 16 g00625900
Use a suitable press to remove bearing (19) from shaft (18) .
Illustration 17 g00666622
Use Tool (E) and a suitable press in order to remove inner race (20) from shaft (18) .
Illustration 18 g00625908
Remove cam plate (21) from the rotating group.
Illustration 19 g00625911
Retainer (22) and piston assemblies (23) are not serviced separately. Prior to the removal of the retainer and the piston assemblies from barrel (24), put identification marks on the piston assemblies, the retainer and the barrel for assembly purposes.
The piston assemblies must be reinstalled in the original bores in the retainer and the barrel.
Remove retainer (22) and piston assemblies (23) from barrel (24) .
Separate the piston assemblies from the retainer.
Illustration 20 g00625917
Note: The orientation of the four washers (25) is important. The four washers must be reinstalled on barrel (24) in the same orientation.
Remove guide (26) and outer spacer (27) from barrel (24) .
Remove four washers (25) and inner spacer (28) from the barrel.
Illustration 21 g00625937
Remove two keys (29) from the travel motor housing.
Illustration 22 g00625920
Use Tooling (F) to remove retaining ring (30) from the shaft end of the travel motor housing.
Illustration 23 g00625936
Illustration 24 g00636454
Use Tooling (G) to remove lip type seal (31) from the travel motor housing if the shaft has been removed from the travel motor.
Use Tooling (H) to remove lip type seal (31) if the shaft has not been removed from the travel motor. Place the travel motor in a vertical position when you use Tooling (H) to remove the lip type seal.
Illustration 25 g00625976
Remove plug (33) and piston (32) from the travel motor housing. Remove O-ring seal (34) from the plug.