AVSPARE.COM
parts catalog

Lafayette 3612 Engine BAA0100 - Caterpillar



BAA0100 Lafayette 3612 Engine Caterpillar parts G3612 Lafayette
Rating:
35
Alternative (cross code) number:
CABAA0100
BAA-0100
BAA0100
Caterpillar BAA0100 Lafayette 3612 Engine

Buy Lafayette 3612 Engine BAA0100 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: BAA0100:

GAS ENGINE  G3612   Caterpillar
  For full view, you need register

Information:


Failure to use an appropriate external ladder or an appropriate platform for direct access to the rear view camera could result in slipping and falling which could result in personal injury or death. Be sure to use an appropriate external ladder or an appropriate platform for direct access to the rear view camera.The machine's counterweight and the engine hood are not approved as a maintenance platforms.
Unexpected machine movement can cause injury or death.In order to avoid possible machine movement, move the hydraulic lockout control to the LOCKED position and attach a Special Instruction, SEHS7332, "Do Not Operate" or similar warning tag to the hydraulic lockout control.
When the rear view camera requires maintenance or service, use the following steps.
Park the machine on a level surface.
Place the work tool on the level surface.
Move the hydraulic lockout control to the Locked position.
Turn the engine start switch to the OFF position and remove the engine start switch key.
Turn the battery disconnect switch to theOFF position and remove the battery disconnect switch key. Clean Camera Lens
If necessary, clean the camera lens before you operate the machine. Use a soft cloth for cleaning.Adjust the Area of Visibility
If the camera displays an undesired view, adjust the area of the visibility.
Illustration 1 g01598213
(1) Cover
(2) Bolt
Illustration 2 g01598214
(3) Bolt
Remove the two bolts (2) in order to remove the cover (1).
Unfasten the two bolts (3).
Illustration 3 g03743998
Adjust the area of the visibility of the camera so that a 1.5 m (5 ft 11 inch) tall obstacle which is 1 m (3 ft) behind the counterweight can be seen.
Tighten the two bolts (3) to a torque of 0.5 0.05 N m (4 0.4 lb in).
Tighten the two bolts (2) to a torque of 55 10 N m (40 7 lb ft) in order to fix the cover (1).

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.