BBD9600 Lafayette 3608 Engine Caterpillar parts
G3608
Rating:
Alternative (cross code) number:
CABBD9600
BBD-9600
BBD9600
CABBD9600
BBD-9600
BBD9600
GAS ENGINE,
Compatible equipment models: BBD9600:
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 143-2099 Unit Injector Tool Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00627676
Inspect the condition of the existing sleeve and ream out the existing sleeve, if necessary. When you are replacing the existing injector sleeve, use a new brass sleeve. It is not necessary to ream the new brass sleeves. Use Tooling (A) to install unit injector sleeve (1) into the cylinder head. Refer to Tool Operating Manual, NEHS0675, "Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines" for the correct procedure. End By:
Install the unit injector. Refer to Disassembly and Assembly, "Unit Injector - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 143-2099 Unit Injector Tool Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00627676
Inspect the condition of the existing sleeve and ream out the existing sleeve, if necessary. When you are replacing the existing injector sleeve, use a new brass sleeve. It is not necessary to ream the new brass sleeves. Use Tooling (A) to install unit injector sleeve (1) into the cylinder head. Refer to Tool Operating Manual, NEHS0675, "Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines" for the correct procedure. End By:
Install the unit injector. Refer to Disassembly and Assembly, "Unit Injector - Install".