AVSPARE.COM
parts catalog

Lafayette 3606 Engine BBMYL00 - Caterpillar



BBMYL00 Lafayette 3606 Engine Caterpillar parts G3606B Lafayette
Rating:
18
Alternative (cross code) number:
CABBMYL00
BBM-YL00
BBMYL00
Caterpillar BBMYL00 Lafayette 3606 Engine

Buy Lafayette 3606 Engine BBMYL00 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: BBMYL00:

GAS ENGINE  G3606B   Caterpillar
  For full view, you need register

Information:

Operator Assist Features
The Remote Control System console mimics operation of the AutoCarry, AutoStow, and AutoRip inside the cab. Implement adjustments for AutoCarry, AutoStow, and AutoRip are made through the Information Display on the machine then cycled through the console. If the features are installed on the machine, then implement assist features are enabled through the console LCD.Full Operation instructions should be used with the Machine Operation and Maintenance Manual.
Illustration 1 g06228867
Operator console
(1) Engine deceleration lever
(2) Service brake lever
(3) Status display
(4) Implement select switch
(5) High-idle engine speed select dial
(6) Blade float select / winch free spool button
(7) Blade assist mode select / winch option slow mode button
(8) Blade pitch / ripper / winch control knob
(9) Implements control
(10) Implement lockout switch
(11) Machine power / engine crank switch
(12) Parking brake switch
(13) Steering / direction control
(14) Gear shift up / down knob
(15) Avoidance zone LED (not used)
(16) Parking brake LED
(17) Software stop LED
(18) Fire suppression switch (if equipped)
(19) Active fault LED
(20) Implement lockout LED
(21) Battery / wireless status LED
Illustration 2 g06229164
Left side of operator console
(22) Engine high / low idle button
(23) Display select button
Illustration 3 g06229168
Right side of operator console
(24) Operator console power button
(25) Horn button
(26) Operator console commanded stop switch
(27) Not used this machine series
(28) Machine work light button
(29) RFID chip slot
Illustration 4 g06198646
Status display
(40) Status display screen
(41) Upper right side user interface button
(42) Middle right side user interface button
(43) Lower right side user interface button
(44) Lower left side user interface button
(45) Middle left side user interface button
(46) Upper left side user interface button
Illustration 5 g06264565
Status display main screen
(47) Engine fault icon
(48) Fuel level indicator
(49) Hydraulic oil temperature gauge
(50) Remote control status indicator
(51) All stop override active
(52) (Not used)
(53) Menu icon
(54) Status bar
(55) Operator requested gear indicator
(56) Tachometer
(57) Current gear indicator
(58) Parameters icon
(59) Conceal mode status icon
(60) Blackout mode status iconAutoCarry (If Equipped)
The AutoCarry mode provides automatic control of the blade lift and blade lower functions during the Carry segment of a dozing cycle. This automatic control is to maintain an optimum blade load. AutoCarry helps to reduce operator fatigue while the best productivity of the machine is maintained. AutoCarry mode works best when the mode is used with BA.Note: The operator is required to load the blade manually before activating the AutoCarry mode. AutoCarry can be activated before the blade is fully loaded. However, AutoCarry will not start controlling blade height until AutoCarry senses that the blade is full.
AutoCarry indicator icon (when activated)AutoCarry - Use the LCD of the console to select the system or deselect the system. The indicator icon will illuminate if the correct operating conditions are present. Press and release blade assist button (7) on the console to activate the AutoCarry function. Press and release blade assist (7) again to deactivate the AutoCarry function.Note: AutoCarry is not to be used with the Mine Rake attachment.AutoStow
The AutoStow feature is a ripper return feature to help the operator be more productive. When AutoStow is activated, the ripper will return to a full lifted position.AutoStow - Rotating the knob clockwise will activate the AutoStow. Configuration

Caterpillar SIS machinery equipment:



Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.