AVSPARE.COM
parts catalog

Lafayette 3606 Engine BCCWS00 - Caterpillar



BCCWS00 Lafayette 3606 Engine Caterpillar parts G3606B Lafayette
Rating:
38
Alternative (cross code) number:
CABCCWS00
BCC-WS00
BCCWS00
Caterpillar BCCWS00 Lafayette 3606 Engine

Buy Lafayette 3606 Engine BCCWS00 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: BCCWS00:

GAS ENGINE  G3606B   Caterpillar
  For full view, you need register

Information:


Illustration 3 g06264342
(A) Alignment plate
(1) 8.0 mm (0.31 inch) Thick standard steel
Replace the cut out top plate with 8.0 mm (0.31 inch) thick standard steel (1). Use an alignment plate (A) to position and tack the new plate (1) using the remaining center plate as reference. Refer to Illustration 3.
Illustration 4 g06264333
(W1) Fillet weld
Perform a fillet weld along the exterior of the new plate. Refer to Illustration 4.Note: Do not weld along the bottom of the new plate.
Install coupler reinforcement plates above the new top plate as per the instructions in Section "Coupler Reinforcement Procedure".
Paint the plates and welds after the welding is completed.Coupler Reinforcement Procedure
Table 1
Required Parts List
Item Sales Model Qty Part Number(1) Description
1 HM315C and HM415C 2 546-1038 Plate
HM418C 2 546-1038 Plate
2 HM315C and HM415C 1 546-1040 Plate
HM418C 1 546-3415 Plate
3 HM315C and HM415C 1 546-1042 Plate
HM418C 1 546-3414 Plate
4 HM315C and HM415C 1 546-1039 Plate
HM418C 1 546-1047 Plate
5 HM315C and HM415C 1 546-1041 Plate
HM418C 1 546-1046 Plate
(1) Part numbers listed here are included in 546-1043 Coupler Kit for HM315C and HM415C and 546-1044 Coupler Kit for HM418C.
Illustration 5 g06264335
Cut off the bottom flat area identified in red color from the top cover plates as shown in Illustration 5.
Illustration 6 g06264337
(1) 546-1038 Plate
Tack weld the reinforcement plates (1) that are identified in yellow color near the sides of the coupler as shown in Illustration 6.
Illustration 7 g06264701
(2) 546-1040 Plate or 546-3415 Plate
(3) 546-1042 Plate or 546-3414 Plate
Tack weld the reinforcement plate (2) and the reinforcement plate (3) that are identified in blue color on top of the coupler as shown in Illustration 7.
Illustration 8 g06264704
(4) 546-1039 Plate or 546-1047 Plate
(5) 546-1041 Plate or 546-1046 Plate
Tack weld the reinforcement plate (4) and the reinforcement plate (5) that are identified in green color on top of the reinforcement plates identified in blue color as shown in Illustration 8.
Illustration 9 g06264340
(W1) Fillet weld
Weld the reinforcement plates that are identified in blue color on the edges. Refer to Illustration 9.Note: Do not weld the exterior area of the blue plates marked in red color where the top cover will sit.
Illustration 10 g06264341
(W1) Fillet weld
Weld the inside part on all contact areas between reinforcement plates and frame as shown in Illustration 10.
Similarly, perform fillet weld on the plates that are identified in yellow color and green color on all edges.
Paint the reinforcement plates and welds after welding.

Caterpillar SIS machinery equipment:



Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.