AVSPARE.COM
parts catalog

Lafayette 3606 Engine BCFGG00 - Caterpillar



BCFGG00 Lafayette 3606 Engine Caterpillar parts G3606B Lafayette
Rating:
50
Alternative (cross code) number:
CABCFGG00
BCF-GG00
BCFGG00
Caterpillar BCFGG00 Lafayette 3606 Engine

Buy Lafayette 3606 Engine BCFGG00 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: BCFGG00:

GAS ENGINE  G3606B   Caterpillar
  For full view, you need register

Information:


Illustration 1 g06296892
Table 1
Item Qty Part Specification Description
1 1 481-1726 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
As required, use the following shim rings in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower jaw. Total shims should be evenly distributes between upper jaw and lower jaw:
2 2 482-5793 Ring Shim Thickness of one shim is 3.0 0.15 mm (0.118 0.006 inch)
3 2 482-5792 Ring Shim Thickness of one shim is 2.50 0.15 mm (0.098 0.006 inch)
4 2 482-5791 Ring Shim Thickness of one shim is 2.00 0.15 mm (0.078 0.006 inch)
5 2 482-5795 Ring Shim Thickness of one shim is 5.00 0.15 mm (0.196 0.006 inch)
6 9 144-5606 Bolt Torque to 520 70 N m (384 52 lb ft).
7 1 481-1723 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
8 1 481-1724 Nut Use the following procedure in order to tighten the nut:
1. Tighten the nut to 300 50 N m (221 37 lb ft).
2. Backoff the nut until the nearest set of holes is aligned.
9 4 8T-8441 Bolt Before assembly, apply blue Loctite 243 to the threads.
10 2 144-4084 Bolt Torque to 520 70 N m (384 52 lb ft).
11 9 7Y-5217 Bolt Torque to 520 70 N m (384 52 lb ft).
12 1 481-1725 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
As required, use the following shim plates in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower:
- 18 463-3827 Shim Plate Thickness of one shim is 1.0 mm (0.04 inch).
- 6 463-3828 Shim Plate Thickness of one shim is 1.5 mm (0.06 inch).
- 3 541-1657 Shim Thickness of one shim is 1.0 mm (0.04 inch).
- 1 541-1658 Shim Thickness of one shim is 1.5 mm (0.06 inch).

Caterpillar SIS machinery equipment:



Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.