AVSPARE.COM
parts catalog

Lafayette 3606 Engine BGWCR00 - Caterpillar



BGWCR00 Lafayette 3606 Engine Caterpillar parts G3606B Lafayette
Rating:
22
Alternative (cross code) number:
CABGWCR00
BGW-CR00
BGWCR00
Caterpillar BGWCR00 Lafayette 3606 Engine

Buy Lafayette 3606 Engine BGWCR00 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: BGWCR00:

GAS ENGINE  G3606B   Caterpillar
  For full view, you need register

Information:

Safety Section
Illustration 1 g00104545Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Personal injury or death can result from improperly checking for a leak.Always use a board or cardboard when checking for a leak. Escaping air or fluid under pressure, even a pin-hole size leak, can penetrate body tissue causing serious injury, and possible death.If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.
Personal injury or death can result from sudden work tool movement.Sudden movement of the work tool can cause injury to persons near the work tool.To prevent injury or death, make sure that the area around the work tool is clear of personnel and obstructions before operating the work tool.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Parts Section
Table 1
557-7852 Auxiliary Control Ar (- 01)
Qty Part No. Description Media
(1) 533-1781 Film Gp -
(1) 552-5468 Front Lines Gp M0090823
(1) 533-1276 Film - Installation of the Films
Illustration 2 g06317509
533-1781 Film Gp
(1) 250-8054 Hammer Film
(2) 260-6941 Controls Film
Illustration 3 g06317508
(3) 533-1276 FilmTuning Section
Set the machine tool control system.
Reference: Excavator Tool Control System, UENR6229, "Testing and Adjusting Section", "Process for setting Up the Work Tool"

Caterpillar SIS machinery equipment:



Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.