BGWYP00 Lafayette 3606 Engine Caterpillar parts G3606B Lafayette
Alternative (cross code) number:
Buy Lafayette 3606 Engine BGWYP00 Caterpillar genuine, new aftermarket tractor parts with delivery
Compatible equipment models: BGWYP00:
GAS ENGINE G3606B Caterpillar
Illustration 8 g06241022The following functions are available to activate in this menu:
2D E-Fence Ceiling - Toggle on/off to activate or deactivate. Enter the height to the barrier
2D E-Fence Floor - Toggle on/off to activate or deactivate. Enter depth to barrier
2D E-Fence Wall - Toggle on/off to activate or deactivate. Enter distance to barrier
CAB Avoidance - Toggle on/off to activate or deactivate. Enter offsets for avoidance
2D E-Fence Swing Left - Toggle on/off to activate or deactivate.
2D E-Fence Swing Right - Toggle on/off to activate or deactivate.
Grade - Toggle on/off to activate/deactivateCab Avoidance Settings Menu
Illustration 9 g06276796To access the cab avoidance settings, press the function menu button while E-Fence is turned on and active in the main screen. From the main screen, press the application menu button. In the Application menu, select "Setting", then "Machine Setting". Next, select "E-Fence", then "CAB Avoidance".
Illustration 10 g06262045The following functions are available in this menu:
CAB Avoidance - Toggle on/off to activate/deactivate
Top Height Offset - Distance of top height offset
Top Forward Offset - Distance of top forward offset
Bottom Forward Offset - Distance of bottom forward offsetSelect the available offsets to change the offset distance settings.Basic Operation
Note: Assist or E-Fence may not work accurately if any of the following conditions exist:
The bucket is loaded with heavy material
The hydraulic oil temperature is either very cold or very hot
Rough or dangerous operation
The machine is not stable due to uneven ground
The machine is experiencing a problem such as a failed sensor or hydraulic system malfunction
Engine speed or hydraulic power setting is set too low
The machine operating on terrain with a steep slope angle
A work tool or front linkage was changed without the required calibrationNote: Assist and E-Fence cannot be used when the Smart Boom, Fine Swing, or the Shovel crane features are active. Assist and E-Fence cannot be used with any work tools other than a bucket.Assist Functions
Boom Assist - Raises the boom automatically during stick operation when boom head pressure is low or stick rod/head pressure is high. Limits boom down operation when boom head pressure is low.
Bucket Assist - The system automatically maintains bucket angle relative to the machine. This feature helps reduce operator fatigue and improves productivity.
Grade Assist - Automatically raises and lowers the boom to adjust the bucket height to the target line to prevent overcutting of the target line. "Quick" - Actuator speed and power is not limited. This mode is good for digging. "Normal" - Actuator speed and power is limited. This mode is good for digging and fine grading. "Fine" - Actuator speed and power is quite limited. This mode is good for fine grading. Refer to Operation and Maintenance Manual, Operating Techniques for more information regarding these settings.
Swing Assist Left - The machine will swing to the left and automatically stop at a certain angle