AVSPARE.COM
parts catalog

Lafayette 3606 Engine BHZPP00 - Caterpillar



BHZPP00 Lafayette 3606 Engine Caterpillar parts G3606B Lafayette
Rating:
51
Alternative (cross code) number:
CABHZPP00
BHZ-PP00
BHZPP00
Caterpillar BHZPP00 Lafayette 3606 Engine

Buy Lafayette 3606 Engine BHZPP00 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: BHZPP00:

GAS ENGINE  G3606B   Caterpillar
  For full view, you need register

Information:

Using 900MHz, Automatic Frequency Selection (AFS) will check if the present radio channel is free. If the radio channel is occupied, the system automatically finds and saves a free radio channel. If the radio channel currently in use is occupied by another radio control system, you must switch the transmitter off and on again to allow AFS to switch to a free radio channel. If AFS is to perform optimally, all the other radio systems in the immediate working environment (such as the factory hall or building site) should be switched on before starting to use the radio system for the first time. Switching all the other radio systems ON before using the system allows AFS to detect automatically which radio channels are already being used in the working area and to choose a suitable free channel for use. In addition, when switching on the radio system for the first time, the user should make sure that the distance from the radio receiver and from the machine is a realistic reflection of the working situation.2.4 GHz technology works with automatic frequency coordination and thus ensures interruption -free working in areas with many radio users. Manual frequency coordination is not necessary. With the worldwide frequency band, 2.4 GHz technology can be used all over the world.Antenna
Illustration 10 g06263406
Operator console receiver antenna on the mode indicator lights
(8) Operator console receiver antenna
Illustration 11 g06268924
Operator console receiver antenna on the right side work lighting
(8) Operator console receiver antennaOperator console receiver antenna (8) is connected to the receiver.The right side work lighting antenna location should be used when the indicator beacon towers have been removed for conceal purposes.
Illustration 12 g06268929
Operator console receiver antennas
(8A) 2.4 GHz antenna
(8B) 900 MHz antennaDepending on the system receiver and the console communication frequency protocol used, the system will utilize one of the following Antenna options:
900 MHz antenna (8B) used with receivers and console sharing a 900MHZ frequency communication protocol.
2.4 GHz antenna (8A) used with receivers and console sharing a 2.4GHZ frequency communication protocol.Note: To ensure that the correct Antenna is installed and to help distinguished the differences between the systems, the 900 MHZ antenna (8B) is about 228.6mm (9.00 inch) with 2 green stripes at the top and the 2.4 GHz antenna (8A) is about 177.8 mm (7.00 inch). Both Antennas use the same coax connection and should be correctly used in coordination with the Console Receiver.Mode Indicator Lights
Illustration 13 g06263444
Rear view of a machine with the mode indicator lights mounted
(9) Mode indicator lightsThe Mode Indicator Lights (9) display the status of the system.For more information on the Mode Indicator Lights (9), refer to the Indicator section of this manual.Ground Level Control Center (GLSC)
The Ground Level Service Center (GLSC) Is mounted in the left fender of the machine and contains
Illustration 14 g06263447
Ground Level Service Center (GLSC)
(10) Manual/remote mode switch
(11) Battery disconnect switchThe Ground Level Service Center (GLSC) contains:
Manual/Remote Mode Switch (10)
Battery Disconnect Switch (11)The GLSC is on the left side of the machine. The GLSC is mounted in the left side fender.Manual/Remote Mode

Caterpillar SIS machinery equipment:



Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.