BJM8900 Lafayette 3616 Engine Caterpillar parts 3616 Lafayette
Alternative (cross code) number:
Buy Lafayette 3616 Engine BJM8900 Caterpillar genuine, new aftermarket tractor parts with delivery
Compatible equipment models: BJM8900:
MARINE ENGINE 3616 Caterpillar
Illustration 1 g03686071
424-5441 Pilot Lines Gp Installation Procedure
Illustration 2 g00104545
Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.
Illustration 3 g03686082
(4) 6V-0852 Dust Cap (8) 164-5628 Connector As (9) 259-7430 Solenoid Valve Gp (12) 392-1993 Support As (13) 148-8336 Connector As (17) 148-8378 Elbow As (18) 164-5567 Quick Disconnect Coupler As (19) 8T-4121 Hard Washer (20) 8T-4136 Bolt (21) 8T-6870 Bolt
Assemble valve group (A) .
Illustration 4 g03688111
(1) 4I-0800 Hose As (2) 4I-9523 Marker Band (Blue) (3) 4I-9526 Marker Band (White) (5) 7K-1181 Cable Strap (6) 087-5767 Hose As (7) 133-5813 Marker Band (Gray) (10) 333-7098 Hose As (11) 391-5275 Hose As
Install hoses (1), (10), and (11) as shown.
Install valve group (A) .
Illustration 5 g03686090
(1) 4I-0800 Hose As (2) 4I-9523 Marker Band (Blue) (3) 4I-9526 Marker Band (White) (5) 7K-1181 Cable Strap (10) 333-7098 Hose As
Install hoses (1) and (10) as shown.
Tighten all hardware and fittings to proper torque unless otherwise specified. Refer to Specifications, SENR3130, "Torque Specifications".
Illustration 6 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect for fluid leaks when the installation of the hydraulic kit is complete.