AVSPARE.COM
parts catalog

Lafayette 3612 Engine BKLPG00 - Caterpillar



BKLPG00 Lafayette 3612 Engine Caterpillar parts G3612 Lafayette
Rating:
83
Alternative (cross code) number:
CABKLPG00
BKL-PG00
BKLPG00
Caterpillar BKLPG00 Lafayette 3612 Engine

Buy Lafayette 3612 Engine BKLPG00 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: BKLPG00:

GAS ENGINE  G3612   Caterpillar
  For full view, you need register

Information:


Parts Disposition
Any parts removed (with the exception of cores used for Caterpillar Remanufactured parts) can be rendered useless and scrapped immediately upon completion of the repair. Attach. (1-Rework Procedure) Rework Procedure TRACK STEMS (2) AND OVERSPEED STEMS (4) 1. Remove end cap housing with seal for a track spool. 2. Remove track stem. 3. Remove housing with seal for one overspeed stem in same valve body. 4. Remove overspeed stem. A longer cover bolt (7X0316 or 7F8698) may be used to remove tension from the spring for the overspeed stem. 5. Measure diameter of overspeed stem removed. Make two measurements 90 deg. apart. 6. Select a new stem. New stem diameters are: 6E2332 = 31.653 +/- 0.002 mm (1.2462 +/- 0.0001") 6E2333 = 31.689 +/- 0.002 mm (1.2476 +/- 0.0001") 6E2841 = 31.725 +/- 0.002 mm (1.2490 +/- 0.0001") Because there can be differences in results from using different measuring equipment, it is necessary to measure the diameter of a new stem and compare it with the diameter of the old stem. The diameter of the new stem selected can be + 0.010 mm (0.0004") - 0.026 mm (0.0010") the diameter of the old stem. 7. Install the new overspeed stem. Install housing with seal for overspeed stem. 8. Repeat Steps 3 through 7 for other overspeed stem in same valve body. 9. Measure diameter of track stem removed. a. Measure and record diameter of three different lands. b. Make two measurements per land, 90 deg. apart. 10. Select a new stem. New stem diameters are: 6E2217 = 38.037 +/- 0.002 mm (1.4975 +/- 0.0001") 6E2215 = 38.057 +/- 0.002 mm (1.4983 +/- 0.0001") 6E2216 = 38.077 +/- 0.002 mm (1.4991 +/- 0.0001") Measure the diameter of a new stem and compare it with the diameter of the old stem. The diameter of the new stem selected can be + 0.002 mm (0.0001") - 0.018 mm (0.0007") the diameter of the old stem. It is possible that new stems will not fit every diameter. Contact your product analyst for assistance if none of the new stems fit within tolerances given. 11. Install the new stem so the end with the part number is toward the outside (left) of machine. 12. Install end cap housing with seal 13. Repeat Steps 1 through 12 for the track stem and overspeed stems in the other valve body. BRAKE RELEASE TIMING CHANGES 14. Remove the tube assembly (3) that connects the track brake valve to the logic valve. This

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.