BLD0800 Lafayette 3612 Engine Caterpillar parts 3612 Lafayette
Alternative (cross code) number:
Buy Lafayette 3612 Engine BLD0800 Caterpillar genuine, new aftermarket tractor parts with delivery
Compatible equipment models: BLD0800:
MARINE ENGINE 3612 Caterpillar
Illustration 1 g06104113There are several specific safety messages on this work tool. The exact location of the hazards and the description of the hazards are reviewed in this section. Please become familiarized with all safety messages.Make sure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the safety messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety message. Loose adhesive will allow the safety message to fall.Replace any safety message that is damaged, or missing. If a safety message is attached to a part that is replaced, install a new safety message on the replacement part. Any Cat dealer can provide new safety messages.Do Not Operate (1)
Illustration 2 g01370904The safety message is located on two sides of the housing for the hammer.
Do not operate or work on this product unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Flying Debris (2)The safety message is located on two sides of the housing for the hammer.
Illustration 3 g01404266
The operation of the hydraulic hammer can cause debris to fly. The flying debris can cause serious injury of death. Stay clear of the hydraulic hammer while the hydraulic hammer is in operation.
Flying Debris (3)
Illustration 4 g02386116The safety message is located on two sides of the housing for the hammer.
Cab should have protective grill and operator should wear safety hat and safety glasses. Flying debris from the work tool could cause serious injury or death.