AVSPARE.COM
parts catalog

Lafayette 3616 Engine BLJPD00 - Caterpillar



BLJPD00 Lafayette 3616 Engine Caterpillar parts 3616 Lafayette
Rating:
23
Alternative (cross code) number:
CABLJPD00
BLJ-PD00
BLJPD00
Caterpillar BLJPD00 Lafayette 3616 Engine

Buy Lafayette 3616 Engine BLJPD00 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,

Compatible equipment models: BLJPD00:

MARINE ENGINE  3616   Caterpillar
  For full view, you need register

Information:

Introduction
This Special Instruction is organized into modules. Caterpillar suggests installing one module at a time. Install the lines for the stick first. Install the lines for the boom next. Install the control groups last.Note: Drain the hydraulic fluid from the hydraulic tank before opening the hydraulic system. Remember to fill the hydraulic tank with hydraulic fluid once the installation is complete.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before operating any compartment or disassembling any component containing fluids.After collecting all fluids in suitable containers, dispose of all fluids according to local regulations and mandates.
324D Field Installed Auxiliary Hydraulics
1. Install the stick lines for your machine.
Stick lines are determined by the length of the stick on the excavator.
Determine the length of the stick in order to select the primary auxiliary lines group.
Determine the rotate lines, and the drain lines.2. Install the boom lines for your machine.
All attachments will require the Primary Auxiliary lines Group. Rotate is only required if a tool that requires a rotate function is installed.Note: Lines are stacked on top of each other so rotate lines cannot be installed without installing the primary auxiliary lines group first.3. Install the selected control group.
Select one control group or column depending on the tools you will be installing. Only one can be installed on a machine.
Table 1
Single Function
438-7232 Auxiliary Control Arrangement - 00    
239-8693 Hydraulic Pedal Control Gp
Special Instruction, GEHS0119
   
251-0436 Wiring Harness Fastener Gp
Special Instruction, GEBB1251
   
255-1661 Pilot Lines Gp
Special Instruction, GEBB1253
   
255-1770 Front Lines Gp
Special Instruction, GEBB1128
   
255-1800 Pilot Lines Gp
Special Instruction, GEHS0446
   
255-5713 Control Valve and Mounting Gp
Special Instruction, GEHS0212
   
   
   
288-7022 Film    
247-7420 Film    
247-7423 Film    4. Install the connector lines group.
The connector lines make the final connection to the tool. Connector lines are specific to the work tool.5. Set the machine tool control system.
ReferenceExcavator Tool Control System, RENR7389, "Testing and Adjusting Section", "Machine Tool Control System - Select"6. Set tool flows and pressures.
ReferenceExcavator Tool Control System, RENR7389, "Testing and Adjusting Section", "Process for Setting Up the Work Tool"Principles of Operation
ReferenceExcavator Tool Control System, RENR7389, "Systems Operation Section", "System 11: Combined Function"ReferenceExcavator Tool Control System, RENR7389, "Systems Operation Section", "Medium Pressure Hydraulic System"Serial Number Identification
Caterpillar Work Tools hydraulic kits are identified with serial numbers. The serial number is printed on a film group (1). This film group should be placed on the right-hand window inside the cab.
Illustration 1 g01742203
Illustration 2 g01743196

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.