AVSPARE.COM
parts catalog

Lafayette 3616 Engine FTFKT00 - Caterpillar



FTFKT00 Lafayette 3616 Engine Caterpillar parts G3616 Lafayette
Rating:
79
Alternative (cross code) number:
CAFTFKT00
FTF-KT00
FTFKT00
Caterpillar FTFKT00 Lafayette 3616 Engine

Buy Lafayette 3616 Engine FTFKT00 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: FTFKT00:

GAS ENGINE  G3616   Caterpillar
  For full view, you need register

Information:

Machine Stopping
Park on a level surface. If it is necessary to park on a grade, block the tracks securely.
The swing parking brake is automatically applied when the engine is stopped, but the swing parking brake is released as soon as swing function of the implement control lever is activated with the engine running. 1. Turn engine speed dial counterclockwise to reduce the engine speed. 2. Release the travel levers/pedals to stop the machine.3. Lower the implement to the ground and apply slight down pressure. 4. Move the hydraulic activation control lever to the LOCKED position.Freezing Conditions
If freezing temperatures are expected, each track roller frame should be cleaned of mud and dirt and the machine parked on wood planks. 1. Position the boom over one side. 2. Use boom down pressure to lift the track on that side off the ground. Operate the track in forward, then reverse until the maximum amount of material is thrown clear.3. Lower the track onto the planks.4. Repeat the procedure for the other track.5. Clean in and around the carrier rollers and track rollers.6. Lower the bucket or implement onto a plank.Engine Stopping
Stopping the engine immediately after it has been working under load, can result in overheating and accelerated wear of the engine components.Refer to the following stopping procedure, to allow the engine to cool, and to prevent excessive temperatures in the turbocharger center housing, (if equipped) which could cause oil coking problems.
1. With the machine stopped, run the engine for five minutes at LOW IDLE. Stopping the engine immediately after it has been working under load, can result in overheating and accelerated wear of the engine components.Never turn the disconnect key to OFF while the engine is running. 2. Turn the engine start key switch to OFF. Remove the key.Leaving the Machine
1. Use the steps and handholds, use both hands and face the machine, when dismounting.2. Inspect the engine compartment for debris. Clean out any debris and paper to avoid a fire.3. Remove all flammable debris from front bottom guard through the access doors to reduce fire hazard.4. If the machine is being parked for an extended of time, such as overnight, turn the disconnect switch key to OFF and remove the key.5. Lock vandalism covers and all compartments, such as tool box cover, engine hood, side covers and fuel tank cap.6. Install the vandalism guards (if equipped).

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.