AVSPARE.COM
parts catalog

Lafayette 3608 Engine VLY0300 - Caterpillar



VLY0300 Lafayette 3608 Engine Caterpillar parts 3608 Lafayette
Rating:
25
Alternative (cross code) number:
CAVLY0300
VLY-0300
VLY0300
Caterpillar VLY0300 Lafayette 3608 Engine

Buy Lafayette 3608 Engine VLY0300 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE AUXILIARY,

Compatible equipment models: VLY0300:

MARINE AUXILIARY  3608   Caterpillar
  For full view, you need register

Information:


Illustration 1 g06243010
Table 1
Item Qty Part Specification Description
1 1 462-4509 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
2 1 316-0045 Nut Use the following procedure in order to tighten the nut:
1. Tighten the nut to 300 50 N m (221 37 lb ft).
2. Backoff the nut until the nearest set of holes is aligned.
3 9 7X-2565 Bolt Torque to 520 70 N m (384 52 lb ft).
4 1 503-7360 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
5 2 8T-6593 Bolt Torque to 520 70 N m (384 52 lb ft).
6 18 7Y-5241 Bolt Torque to 520 70 N m (384 52 lb ft).
7 1 449-8125 Nut Use the following procedure in order to tighten the nut:
1. Tighten the nut to 300 50 N m (221 37 lb ft).
2. Backoff the nut until the nearest set of holes is aligned.
8 6 6V-3938 Bolt Before assembly, apply blue Loctite 243 to the threads.
9 1 449-8126 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
- As required, use the following shim plates in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower:
30 169-0386 Shim Thickness of one shim is 1.0 mm (0.04 inch).
10 169-0388 Shim Thickness of one shim is 1.5 mm (0.06 inch).
2 169-6062 Shim Thickness of one shim is 1.0 mm (0.04 inch).
2 169-6063 Shim Thickness of one shim is 1.5 mm (0.06 inch).
6 169-7118 Shim Thickness of one shim is 1.0 mm (0.04 inch).
2 169-7119 Shim Thickness of one shim is 1.5 mm (0.06 inch).
- As required, use the following shim rings in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower jaw. Total shims should be evenly distributes between upper jaw and lower jaw:
2 172-3725 Shim Thickness of one shim is 2.50 0.15 mm (0.098 0.006 inch)
2 172-3726 Shim Thickness of one shim is 3.00 0.15 mm (0.118 0.006 inch).
2 172-3727 Shim Thickness of one shim is 3.50 mm (0.137 inch).

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.