AVSPARE.COM
parts catalog

Lafayette 3608 Engine WNK3900 - Caterpillar



WNK3900 Lafayette 3608 Engine Caterpillar parts 3608 Lafayette
Rating:
27
Alternative (cross code) number:
CAWNK3900
WNK-3900
WNK3900
Caterpillar WNK3900 Lafayette 3608 Engine

Buy Lafayette 3608 Engine WNK3900 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE AUXILIARY,

Compatible equipment models: WNK3900:

MARINE AUXILIARY  3608   Caterpillar
  For full view, you need register

Information:


Illustration 1 g06243349
Table 1
Item Qty Part Specification Description
1 1 503-7364 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
2 12 144-5479 Bolt Torque to 520 70 N m (384 52 lb ft).
3 1 459-7330 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
4 1 459-7333 Nut Use the following procedure in order to tighten the nut:
1. Tighten the nut to 300 50 N m (221 37 lb ft).
2. Backoff the nut until the nearest set of holes is aligned.
5 4 8T-8441 Bolt Before assembly, apply blue Loctite 243 to the threads.
6 1 459-7332 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
- As required, use the following shim plates in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower:
2 463-3826 Shim Plate Thickness of one shim is 1.5 mm (0.06 inch).
6 463-3827 Shim Plate Thickness of one shim is 1.0 mm (0.04 inch).
2 463-3828 Shim Plate Thickness of one shim is 1.5 mm (0.06 inch).
6 502-9412 Shim Thickness of one shim is 1.0 mm (0.04 inch).
3 502-9414 Shim Thickness of one shim is 1.0 mm (0.04 inch).
1 502-9415 Shim Thickness of one shim is 1.5 mm (0.06 inch).
- As required, use the following shim rings in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower jaw. Total shims should be evenly distributes between upper jaw and lower jaw:
2 369-4514 Ring Shim Thickness of one shim is 2.0 mm (0.08 inch)
2 369-4515 Ring Shim Thickness of one shim is 2.50 0.15 mm (0.098 0.006 inch)
2 369-4516 Ring Shim Thickness of one shim is 3.00 0.15 mm (0.118 0.006 inch).
2 173-1687 Shim Thickness of one shim is 5.00 0.15 mm (0.196 0.006 inch)

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.