2C6361 LAMP GROUP (flasher) Caterpillar parts
120G, 130G
Rating:
Alternative (cross code) number:
CA2C6361
2C-6361
2C6361
CA2C6361
2C-6361
2C6361
Weight: 8 pounds 3 kg.
MOTOR GRADER,
Number on catalog scheme:
26
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench 1 Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Turn the disconnect switch OFF when draining and/or removing any fuel system components.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Note: Put identification on all lines, hoses, wires, and tubes for installation purposes. Use caps and plugs on all lines, hoses, and tubes to prevent fluid loss or contamination of the systems.
Illustration 1 g06077345
Using Tooling (A) remove fuel filters (5).
Remove tube assembly (1).
Disconnect hose assembly (3).
Remove bolts (2).
Remove fuel filter base (4).Installation Procedure
Install fuel filter base (4) and fuel filters (5) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench 1 Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Turn the disconnect switch OFF when draining and/or removing any fuel system components.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Note: Put identification on all lines, hoses, wires, and tubes for installation purposes. Use caps and plugs on all lines, hoses, and tubes to prevent fluid loss or contamination of the systems.
Illustration 1 g06077345
Using Tooling (A) remove fuel filters (5).
Remove tube assembly (1).
Disconnect hose assembly (3).
Remove bolts (2).
Remove fuel filter base (4).Installation Procedure
Install fuel filter base (4) and fuel filters (5) in the reverse order of removal.
Caterpillar parts catalog:
Parts lamp Caterpillar catalog:
120G
7D6897
LAMP GROUP
120G, 12G, 130G, 140, 140G, 14G, 16G
120G, 12G, 130G, 140, 140G, 14G, 16G
9D1344
LAMP ASSEM.
120G, 12G, 130G, 140G, 14G, 16G
120G, 12G, 130G, 140G, 14G, 16G
2Y2016
LAMP GROUP
120B
120B
MS354781683
LAMP
130G
130G
2G6045
LAMP GROUP
120G
120G