LAMP AS-INDICATOR 3089779 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     1    
Verify that all of the components are clean and free of foreign material prior to installation. Check all of the O-ring seals and the components for wear or damage. Replace the O-ring seals and the components, if necessary.
Lubricate all O-ring seals with the lubricant that is being sealed.
Illustration 1 g00593944
Install O-ring seal (17) to pump inlet elbow (14). Install O-ring (16) to the front housing.
Illustration 2 g00593938
Illustration 3 g00593941
Attach Tool (A) to engine oil pump (8), as shown. Position a suitable lifting device to Tool (A). Secure the lifting device to a hoist.
Position engine oil pump (8) to the front housing, as shown. Install three bolts (15) and the washers that hold engine oil pump (8) to the front housing.
Illustration 4 g00593937
Install two bolts (13) and the washers that hold pump inlet elbow (14) to engine oil pump (8) .
Illustration 5 g00593935
Install O-ring seal (12) to outlet elbow (10) .
Illustration 6 g00593933
Position outlet elbow (10) onto engine oil pump (8), as shown. Install four bolts (11) that hold outlet elbow (10) to engine oil pump (8) .
Illustration 7 g00593931
Position fuel transfer pump (3) to engine oil pump (8), as shown. Install four bolts (9) that hold fuel transfer pump (3) to engine oil pump (8) .
Illustration 8 g00593929
Position bracket (7) to the engine, as shown. Install two bolts (6) and the washers that hold bracket (7) to the engine.
Illustration 9 g00593928
Install bolt (4), the washer, and the clip that holds tube assembly (2) to bracket (5) .
Illustration 10 g00593924
Connect tube assembly (2) to fuel transfer pump (3). Connect hose assembly (1) to fuel transfer pump (1) .End By: Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Remove".