LAMP GP 3168038 - Caterpillar

Illustration 1 g01437986
Illustration 2 g01437990
When the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Speed ... 5500 rpm minimum Current draw ... 140 amp maximum Voltage ... 24 V (1) Battery terminal nutA maximum of three cable or wire terminals should be between the nuts. Torque ... 30.5 3.5 N m (22 3 lb ft) (2) Ground terminal nut Torque ... 30.5 3.5 N m (22 3 lb ft) (3) Ground terminal nut Torque ... 2.25 0.25 N m (20 2 lb in) (4) Switch terminal nutThe wire terminal that is on the switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. Torque ... 2.25 0.25 N m (20 2 lb in) (5) Motor terminal nut Torque ... 30.5 3.5 N m (22 3 lb ft) (6) Nut Torque ... 30.5 3.5 N m (22 3 lb ft)Clearance between the pinion and the housing ... 8.3 to 9.9 mm (0.33 to 0.39 inch)Solenoid
Current draw at 24 V and 25 °C (77 °F) Pull-in windings ... 51 Amp Hold-in windings ... 7 Amp maximum