LAMP GP-PANEL ILLUMINATION 3170082 - Caterpillar

Product Identification Number (PIN)
Illustration 1 g00841581
The PIN plate is located on the frame in front of the front left tire.
Illustration 2 g02436556Model number (A)____________________Product Identification Number (B)____________________Service Information Plate (C)____________________Month and Year of Manufacture Plate (If Required) (D)____________________CE Plate (If Required) (E)____________________Country of Origin Info Plate (If Required) (F)____________________Local regulation may require documentation of the month and/or year of manufacture in the Operation and Maintenance Manual. Enter on line (D) above if required.Serial Number Plates (SN)
Illustration 3 g00524672Transmission Serial Number____________________
Illustration 4 g00524673Engine Serial Number____________________The following information is stamped on the identification plate for the truck body:Truck Body Serial Number____________________The following information is stamped on the component:Torque Converter Serial Number____________________Certification
ROPS/FOPS Plate
This certification plate is located on the outside of the cab on the right side of the ROPS.
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
Illustration 5 g00100417
Type 1
Illustration 6 g00939192
Type 2
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Eurasian Economic Union
For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.
Illustration 7 g06094564The Month and Year of Manufacture are on the PIN plate.Manufacturer Information
Manufacturer:Caterpillar Inc.,
100 N.E. Adams Street
Peoria, Illinois 61629, USA
Entity authorized by the manufacturer at the territory of Eurasian Economic Union:Caterpillar Eurasia LLC
75, Sadovnicheskaya Emb.
Moscow 115035, Russia