LAMP GP-SIGNAL 3217871 - Caterpillar

Illustration 1 g06257012
Top view
Table 1
Item Qty Part Specification Description
- Position "S" that is on inner race (12) relative to the carbody assembly (1) and bearing stopper (2). Refer to Illustration 1 for the correct orientation of the races.
3 23 492-0627 Bolt Before assembly, remove compound, oil and dust from female threads, then apply Loctite C5A Copper Anti-Seize Compound to threads.
Use the following tightening procedure:
1. Tighten bolts to 274 29 N m (202 21 lb ft).
2. Turn to an additional angle of 60 5 degrees.
4 1 096-4902 Dowel Before assembly, apply Loctite C5A Copper Anti-Seize Compound to the dowel holes.
5 1 7Y-1650 Hose Clamp Torque to 5.4 0.5 N m (47.8 4.4 lb in).
6 8 8T-4136 Bolt Before assembly, apply blue Loctite 243 to the threads.
Torque to 37 4 N m (27 3 lb ft).
7 4 8T-4136 Bolt Before assembly, apply blue Loctite 243 to the threads.
Torque to 20 2 N m (177 18 lb in).
8 - - Before assembly, apply 8C-8422 Sealant between the mating surfaces of the gear group and upper frame assembly, and between the gear group and carbody assembly. Sealant must be applied to each inward mating surface from bolt hole pitch circle diameter and keep tracking continuously.
9 2 8T-4137 Bolt Before assembly, apply blue Loctite 243 to the threads.
Torque to 37 4 N m (27 3 lb ft).
10 19 493-3210 Bolt Before assembly, remove compound, oil and dust from female threads, then apply Loctite C5A Copper Anti-Seize Compound to threads.
Use the following tightening procedure:
1. Tighten bolts to 274 29 N m (202 21 lb ft).
2. Turn to an additional angle of 60 5 degrees.
11 40 492-0628 Bolt Before assembly, remove compound, oil and dust from female threads, then apply Loctite C5A Copper Anti-Seize Compound to threads.
Use the following tightening procedure:
1. Tighten bolts to 274 29 N m (202 21 lb ft).
2. Turn to an additional angle of 60 5 degrees.