LAMP GP-MARKER 3393189 - Caterpillar

Illustration 9 g00848511
Disconnect hose assemblies (20) from propel pump (21) .
Illustration 10 g00848512
Disconnect hose assemblies (22) from the propel pump.
Illustration 11 g00848513
Remove clamp (23) .
Remove bolt (25) that fastens the two clamps together.
Remove the two bolts and move bracket (24) and the hose assemblies out of the way.
Illustration 12 g00848514
Disconnect hose assemblies (27) and (28) from the brake and shift valve.
Remove clamp (26) .
Illustration 13 g00848515
Disconnect three hose assemblies (30) from steering pump (29) .
Illustration 14 g00848516
Disconnect electrical connectors (31) and (34) .
Remove the two wires from relays (33) .
Remove the tie straps that fasten wiring harness (32) on the frame.
Illustration 15 g00848517
Disconnect hose assemblies (35) from the hydraulic oil cooler.
Illustration 16 g00848518
Turn valves (36) to the CLOSED position.
Disconnect fuel lines (37). Remove the clamp that fastens the fuel lines on the engine.
Illustration 17 g00848519
Remove wires (38) from the fuel level sending unit.
Remove the tie straps that fasten wiring harness (39) on the fuel tank and the frame.
Illustration 18 g00848898
Remove wires (40) and (41) from the starter.
Remove the two bolts and the clamps that fasten wire (40) on the engine.
Illustration 19 g00848521
Disconnect electrical connectors (42) .
Illustration 20 g00848522
Remove ground wires (43) and disconnect electrical connectors (44) .
Remove the tie straps that fasten wiring harness (45) on the frame.
Illustration 21 g00848523
Illustration 22 g00848611
Attach a hoist to engine (46), as shown. The weight of the engine, the radiator and the pumps as a unit is 850 kg (1874 lb).Note: Check that all necessary hose assemblies and all necessary electrical wires are disconnected.
Remove three bolts (47) and remove the engine, the radiator and the pumps from the machine.