LAMP GP-HEAD & SIGNAL 3744299 - Caterpillar

Illustration 23 g06306497After the Digital Pulse Load Test is completed, results similar to one of the following sample screens will appear.
Illustration 24 g06306018Other Menu Items
Illustration 25 g06305944
Illustration 26 g06305984
Illustration 27 g06305992
Illustration 28 g06305567Hints to Avoid File Errors
The unit will detect if the USB memory device is full and report the error.
If data file already exists, the unit will append the new data to the file.
The smart port uses 8.3 filename convention. Memory devices that have long file names will cause errors.
The smart port uses FAT File System. Memory devices with other file systems will cause errors.
For best results, use USB memory devices that have the FAT File System, plenty of free disk space, and only have file names in the 8.3 file naming format.
Wait until prompted to insert the USB memory device into the smart port.Printing Test Results
Illustration 29 g06307949Point the 480-4131 Battery Analyzer in the direction of the Infrared Printer (within 15 ft.). Press print. Wait for the screen to clear before moving the analyzer. It takes a moment to send all the test data.
Make sure that the Infrared Printer is properly set up.
After a test is made, make sure that the results are displayed on the LCD.
Point the analyzer in the direction of the Infrared Printer (within 15 ft).
Press the PRINT key and the test results will be printed.
Depending on the test made, the printer will sometimes yield more information than the LCD.
Wait until the printer stops printing before you press the print key again.Note: Contact Supplier to purchase the optional printer.Volt Meter
Scroll down to Volt Meter, then select VOLT METER by pressing Y.
Illustration 30 g06305194Setup
Scroll down to Setup. Select Setup by pressing Y.
Illustration 31 g06305200
Illustration 32 g06305184Limited Warranty
12 Months from Date of Purchase
The manufacturer warrants to the consumer that this product will be free from defects in material or workmanship for a period of twelve (12) months from the date of original purchase.Products that fail within this 12 month warranty period will be repaired or replaced at the manufacturer's option to the consumer, when determined by the manufacturer that the product failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of parts and the necessary labor by the manufacturer to effect the repair or replacement of the product. In no event shall the manufacturer be responsible for special, incidental, or consequential damages or costs incurred due to the failure of this product.Improper use, accident, water damage, abuse, unauthorized repairs, or alterations voids this warranty. The manufacturer disclaims any liability or consequential damages due to breach of any written or implied warranty on its test equipment.Warranty and Service Information
Warranty claims to the manufacturer's service department must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser and is non-transferable. Shipper damage incurred during return shipments is not covered under this warranty. It is the responsibility of the shipper (the customer returning the Test Equipment) to package the tester properly to prevent any damage during return shipment. Repair costs for such