LAMP AS-FLOOD 4798445 - Caterpillar

Illustration 1 g03590242
Front view
Illustration 2 g03590244
Section A-A
Table 1
Specification for 241-3342 Engine Oil Lines Gp
Item Qty Part Specification Description
1 - - Lubricate the bore of the O-ring seals with the lubricant that is being sealed.
2 - - Pressure difference for opening the oil cooler bypass valve is 180 20 kPa (26 3 psi).
3 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).
The oil cooler bypass valve must open with a pressure difference of 180 20 kPa (26 3 psi).
Illustration 3 g03590246
Right side view of engine
Table 2
Item Qty Part Specification Description
4 - - The cooling jet sequence valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
The cooling jet sequence valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
5 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 85 to 100 N (19 to 22 lb).
Free length after test is 112.7 mm (4.44 inch).