LAMP GP-SIGNAL 5101509 - Caterpillar

Illustration 1 g01502637
Left side of left instrument panel (1) vibratory switchVibratory switch (1) is located on the left side of each instrument panel. The vibratory switch on the left instrument panel is shown in the above illustration. The position of the selector switch on the operator station determines if the vibratory switch on the right instrument panel or the vibratory switch on the left instrument panel is active.Vibratory switch (1) is a toggle switch with two positions. The top position is the ON position, and the bottom position is the OFF position.Note: Refer to Systems Operation, "Operator Controls (Auxiliary System)" for additional information about the selector switch on the operator station.
Illustration 2 g01502638
Right screed operator station (2) Vibratory speed dialThe right screed operator station is equipped with vibratory speed dial (2). There is no vibratory speed dial on the left screed operator station.The vibratory speed dial varies the vibratory frequency between zero and the calibrated maximum frequency.