5345071 LAMP Caterpillar parts
Rating:
Alternative (cross code) number:
CA5345071
534-5071
5345071
CA5345071
534-5071
5345071
Weight: 0.01 pounds 0 kg.
Information:
Solution
In the event of failure, add an additional ground wire from the wiper controller to the platform ground directly. Adjust different platform ground wire terminal order, ensure strap terminal contact to ground boss directly.Follow the"Rework Procedure" to separate the wiper controller ground line.Rework Procedure
Table 1
Required Parts List
Item Qty Part Number Part Name
1 1 339-5457 Wire
2 3 3S-2093 Cable Strap
3 3 7K-1181 Cable Strap Turn off the disconnect switch before starting the rework.
Illustration 2 g06204983
Wire: From wiper controller to platform ground
Illustration 3 g06205001
(1) 339-5457 Wire
Illustration 4 g06204990
View of A
(1) 339-5457 Wire
(2) 3S-2093 Cable Strap
(B) Wiper controller connector
(C) Wiper controller
Remove the wiper controller connector (B) from the wiper controller (C).
Illustration 5 g06204993
(D) Connector position
Remove the "BK 200-F180" wire from the wiper controller connector position 10 (D).
Insulate the sealed "BK 200-F180" terminal with black PVC tape.
Illustration 6 g06205007
(2) 3S-2093 Cable Strap
(E) Main harness
Fix the "BK 200-F180" wire with 3S-2093 Cable Strap (2) to main harness (E).
Illustration 7 g06204993
(D) Connector position
Insert the 339-5457 Wire (1) to the wiper controller connector position 10 (D).
Illustration 8 g06205009
(F) Ground strap
(G) New separate ground wire
Connect the wiper controller connector (A) from the wiper controller (B). Refer to Illustration 8.
Illustration 9 g06205015
View of A
(1) 339-5457 Wire
(3) 7K-1181 Cable Strap
(H) 8T-4137 Bolt
(J) 8T-4121 Hard Washer
Remove the 8T-4137 Bolt (H), and 8T-4121 Hard Washer (J).
Illustration 10 g06205017
(L) 457-8759 Bolt
(M) 453-3454 Hard Washer
(N) Existing ring terminals
(P) Additional ring terminals
(R) Platform
(S) Ground strap
Insert the 457-8759 Bolt (L), 453-3454 Hard Washer (M), ring terminals (P), and ground strap (S). Tighten the bolts (L) to a torque of 30 7 N m (265 62 lb in).
Fix the wire (1) with the 7K-1181 Cable Strap (3) to the main harness (E).
In the event of failure, add an additional ground wire from the wiper controller to the platform ground directly. Adjust different platform ground wire terminal order, ensure strap terminal contact to ground boss directly.Follow the"Rework Procedure" to separate the wiper controller ground line.Rework Procedure
Table 1
Required Parts List
Item Qty Part Number Part Name
1 1 339-5457 Wire
2 3 3S-2093 Cable Strap
3 3 7K-1181 Cable Strap Turn off the disconnect switch before starting the rework.
Illustration 2 g06204983
Wire: From wiper controller to platform ground
Illustration 3 g06205001
(1) 339-5457 Wire
Illustration 4 g06204990
View of A
(1) 339-5457 Wire
(2) 3S-2093 Cable Strap
(B) Wiper controller connector
(C) Wiper controller
Remove the wiper controller connector (B) from the wiper controller (C).
Illustration 5 g06204993
(D) Connector position
Remove the "BK 200-F180" wire from the wiper controller connector position 10 (D).
Insulate the sealed "BK 200-F180" terminal with black PVC tape.
Illustration 6 g06205007
(2) 3S-2093 Cable Strap
(E) Main harness
Fix the "BK 200-F180" wire with 3S-2093 Cable Strap (2) to main harness (E).
Illustration 7 g06204993
(D) Connector position
Insert the 339-5457 Wire (1) to the wiper controller connector position 10 (D).
Illustration 8 g06205009
(F) Ground strap
(G) New separate ground wire
Connect the wiper controller connector (A) from the wiper controller (B). Refer to Illustration 8.
Illustration 9 g06205015
View of A
(1) 339-5457 Wire
(3) 7K-1181 Cable Strap
(H) 8T-4137 Bolt
(J) 8T-4121 Hard Washer
Remove the 8T-4137 Bolt (H), and 8T-4121 Hard Washer (J).
Illustration 10 g06205017
(L) 457-8759 Bolt
(M) 453-3454 Hard Washer
(N) Existing ring terminals
(P) Additional ring terminals
(R) Platform
(S) Ground strap
Insert the 457-8759 Bolt (L), 453-3454 Hard Washer (M), ring terminals (P), and ground strap (S). Tighten the bolts (L) to a torque of 30 7 N m (265 62 lb in).
Fix the wire (1) with the 7K-1181 Cable Strap (3) to the main harness (E).
Parts lamp Caterpillar catalog:
5345066
LAMP
Caterpillar
Caterpillar
5345061
LAMP
Caterpillar
Caterpillar
5345056
LAMP
Caterpillar
Caterpillar
5344705
LAMP
Caterpillar
Caterpillar
5344699
LAMP
Caterpillar
Caterpillar
5344501
LAMP
Caterpillar
Caterpillar
5347753
LAMP
Caterpillar
Caterpillar
5347641
LAMP
Caterpillar
Caterpillar
5345446
LAMP
Caterpillar
Caterpillar
5345302
LAMP AS
Caterpillar
Caterpillar
5345126
LAMP
Caterpillar
Caterpillar
5345121
LAMP
Caterpillar
Caterpillar