LAMP AS-TURN 5386561 - Caterpillar

Specifications
Table 1
Transmission Lubrication Oil Pressure Test    
Date    Equipment ID Code    
Item     Specification     Actual    
Engine Speed (HIGH IDLE)     2110 50 rpm        
Pressure at tap (L1)    
393 48 kPa (57 7 psi)        
Engine Speed (LOW IDLE)     800 30 rpm        
Pressure at tap (L1)     >
19 kPa (3 psi)        Introduction
The following test will determine whether the pressure of the transmission lubrication oil is at the specified limit. This oil is delivered from the power train oil cooler to the lubrication distribution manifold.Required Tools
Illustration 1 g01089423
Tooling (A)
Illustration 2 g01623868
Tooling (B) 198-4240 Digital Pressure Indicator Gp
Table 2
Required Tools    
Tooling    Item    Part
Number    Description    Qty    
A     A1     8T-0855     Pressure Gauge
0 to 4000 kPa (0 to 580 psi)     1    
A2 6V-3989     Fitting     1    
A3 6V-4143     Coupler     2    
A4 177-7861     Hose As
41370 kPa (6000 psi)     1    
B     198-4240     Digital Pressure Indicator Gp        
    B1     198-4234     Digital Indicator     1    
B2 198-4237     Pressure Sensor Gp
(0 to 3,445 kPa (0 to 500 psi))     1    
B3 198-4236     Adapter Cable As     1    ReferenceTool Operating Manual, NEHS0818, "Using the 198-4240 Digital Pressure Indicator Group" for more information on using Tooling (B) .Machine Preparation
Move the machine to a smooth horizontal location.
Permit only one operator on the machine. Keep all other personnel away from the machine or in the sight of the operator.
Place