LATCH AS 1228242 - Caterpillar

Illustration 1 g01727158
216-2815 Spool Assembly The new spool has a metering notch. The metering notch is shown in Illustration 1.The 216-2815 Spool Assembly is used in place of the 9P-0656 Spool Assembly in control stations G and H of the transmission hydraulic control. These stations control clutches 6 and 7, which are used in first gear, second gear, third gear, and reverse ranges.
Illustration 2 g01667107
(1) Station G solenoid for clutch 6 (2) Station H solenoid for clutch 7The 216-2815 Spool Assembly is an alternate part number for the D400E Series II (S/N: 8PS) model.Adaptable To: When you install the new spool it is necessary to change the initial pressure setting. This process must be done at the time of installation. See table 1 for initial pressure settings.
Table 1
Initial pressure settings    
Old part     New part    
9P-0656
Spool     216-2815
Spool    
344 kPa (50 psi)    
448 kPa (65 psi)    The new 216-2815 Spool is adaptable to the following machines:
735 (S/N: B1N880-1326)
740 (S/N: AXM1-2154)
740 (S/N: B1P1-5095)
740EJ (S/N: AZZ1-390)
740EJ (S/N: B1R1-493)
D400E Series II (S/N: 8PS1-1079)The new 216-2815 Spool is effective with the following machines :
735 (S/N: B1N1310-1312,1314-1322,1324-1325,1327-UP)
740 (S/N: B1P5041-5041,5046-5060,5062-5090,5092-5094,5096-UP)
740EJ (S/N: B1R494-UP)