LATCH AS-DOOR 1782566 - Caterpillar

(7HR) Wheel LoaderDescription of Change: 992G Wheel Loaders now feature new software. The new software features the following changes.* Cold Cylinder Cutout deactivates if the engine speed drops 100 rpm below low idle. This was 50 rpm in previous software.* Added Cold Cylinder Cutout ON/OFF option. Default is ON.* Loss of Coolant Flow event is disabled if Ground Level Shutdown switch causes a shutdown or engine speed is 50 rpm or more below low idle.* Coolant Flow status on the service tool status screen is updated regardless of whether or not the engine is running. Loss of Coolant Flow event logging still requires the engine to be running.* Added Fuel Correction Factor programmable parameter allows the customer to fine-tune the Engine Control's calculation of fuel used.Adaptable To: The new 163-7212 Electronic Software Group replaces the former 150-1194 Electronic Software Group. A new 163-7213 Control Group chip is also available. The new software feature and personality module chip are effective with the 3508B (2GR1658-Up) Engines on the 992G (7HR) Wheel Loaders and are adaptable to all 3508B (2GR) Engines.