1926438 LATCH AS Caterpillar parts
834G, 836G, 836H
Rating:
Alternative (cross code) number:
CA1926438
192-6438
1926438
CA1926438
192-6438
1926438
Weight: 1 pounds 0 kg.
LANDFILL COMPACTOR, WHEEL DOZER,
Information:
Do not leave any heavy item or object with a sharp point on the seat.Do not cover the seat or seat back with a blanket, seat cushion or any other similar covering. The seat heater can be over heated. Be sure to remove any spills on the seat and thoroughly dry the spill.
Hydraulic Lockout Control (32)
Illustration 11 g01354766The left console must be in the DOWN position in order to operate any factory installed hydraulic controls. However, the steering and the brakes will be operable if the left console is in the RAISED position.Locked - Lift the knob in order to raise the left console. When the left console is raised, all factory installed hydraulic controls are inoperable except steering and brakes except when the machine is in backup mode.Note: The parking brake, the oscillating axle lock, and the swing brake are engaged when the left console is in the RAISED position.Unlocked - Push down on the left console until the left console latches in order to operate the factory installed hydraulic controls.Note: In order to start the engine, the left console must be in the RAISED position. If the console is in the DOWN position, the engine start switch will not function.Hydraulic Cab Riser (33)
Hydraulic cab riser (33) - Push down on the top of the hydraulic cab riser switch in order to activate the hydraulic cab riser. The indicator light on the bottom of the switch will illuminate. Push on the bottom of the hydraulic cab riser switch in order to deactivate the hydraulic cab riser. Refer to Operation and Maintenance Manual, "Joystick Controls" for more information on lowering the cab and raising the cab.Cab Lowering Control Device
If the engine is shut down or the hydraulic system fails, the operator can still lower the cab.Use the following procedure to lower the cab from the raised position while the operator is in the cab:
Illustration 12 g01354794
Turn the control lever inside the cab under the front right side of the seat in order to lower the cab. Use the following procedure from the ground to lower the cab from the raised position while the operator is in the cab:
Illustration 13 g01354585
Turn the control lever that is located inside the radiator compartment in order to lower the cab. Left Front Stabilizer (34)
Stabilizer switch (35) -
Caterpillar parts catalog:
Parts latch Caterpillar catalog:
2304329
LATCH AS
D8R II
D8R II
8E5922
LATCH
D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8T, D9N, D9R, D9T
D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8T, D9N, D9R, D9T
1851663
LATCH AS
325B L, 330B L, 330C L, 345B II, 345B L
325B L, 330B L, 330C L, 345B II, 345B L
4384157
LATCH AS.
FB221
FB221
4384153
LATCH BAR
FB221
FB221
2861102
LATCH AS
814F II, 815F II, 816F II
814F II, 815F II, 816F II
2400318
LATCH AS
D11R, D11T
D11R, D11T
1777078
LATCH
826G, 826G II, 826H
826G, 826G II, 826H
4V8782
LATCH
816B, 826C
816B, 826C
6W0423
LATCH
826C
826C
6W7317
LATCH
824C, 825C, 826C
824C, 825C, 826C