2769277 LATCH AS Caterpillar parts
303.5C, 303C CR, 304C CR, 305C CR
Rating:
Alternative (cross code) number:
CA2769277
276-9277
2769277
CA2769277
276-9277
2769277
Weight: 0.98 pounds 0 kg.
MINI HYD EXCAVATOR,
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03382451
Disconnect the breather hose from the separator for the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove" for the correct procedure.
Remove bolts (1) and bolts (2) from valve mechanism cover (3). Note: The bolts are of two different lengths. Note the positions of the different bolts.
Remove valve mechanism cover (3) from valve mechanism cover base (5).
Remove gasket (3) from valve mechanism cover (2).
If necessary, remove the separator for the crankcase breather from the valve mechanism cover base. Refer to Disassembly and Assembly, "Crankcase Breather - Remove" for the correct procedure. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean all gasket surfaces of the valve mechanism cover. Clean the gasket surfaces of the valve mechanism cover base.
If necessary, install the separator for the crankcase breather to valve mechanism cover (2). Refer to Disassembly and Assembly, "Crankcase Breather - Install" for the correct procedure.
Illustration 2 g03382451
Illustration 3 g03382471
Illustration 4 g03382469
Install a new gasket (4) to valve mechanism cover (3). Note: Ensure that the gasket is fully seated into the groove of the valve mechanism cover.
Ensure that harness assemblies (6) are not in contact with the rocker arms of valve mechanism cover base (5). Position valve mechanism cover (3) onto valve mechanism cover base (5). Ensure that harness assemblies (5) are not trapped during the assembly procedure. Install bolts (1).
Install bolts (1) and bolts (2) to valve mechanism cover (3).
Tighten bolts (1) and bolts (2) in the numerical sequence that is shown in Illustration 4. Tighten the bolts to a torque of 22 N m (195 lb in).
Connect the breather hose to the separator for the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03382451
Disconnect the breather hose from the separator for the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove" for the correct procedure.
Remove bolts (1) and bolts (2) from valve mechanism cover (3). Note: The bolts are of two different lengths. Note the positions of the different bolts.
Remove valve mechanism cover (3) from valve mechanism cover base (5).
Remove gasket (3) from valve mechanism cover (2).
If necessary, remove the separator for the crankcase breather from the valve mechanism cover base. Refer to Disassembly and Assembly, "Crankcase Breather - Remove" for the correct procedure. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean all gasket surfaces of the valve mechanism cover. Clean the gasket surfaces of the valve mechanism cover base.
If necessary, install the separator for the crankcase breather to valve mechanism cover (2). Refer to Disassembly and Assembly, "Crankcase Breather - Install" for the correct procedure.
Illustration 2 g03382451
Illustration 3 g03382471
Illustration 4 g03382469
Install a new gasket (4) to valve mechanism cover (3). Note: Ensure that the gasket is fully seated into the groove of the valve mechanism cover.
Ensure that harness assemblies (6) are not in contact with the rocker arms of valve mechanism cover base (5). Position valve mechanism cover (3) onto valve mechanism cover base (5). Ensure that harness assemblies (5) are not trapped during the assembly procedure. Install bolts (1).
Install bolts (1) and bolts (2) to valve mechanism cover (3).
Tighten bolts (1) and bolts (2) in the numerical sequence that is shown in Illustration 4. Tighten the bolts to a torque of 22 N m (195 lb in).
Connect the breather hose to the separator for the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Install" for the correct procedure.
Caterpillar parts catalog:
Parts latch Caterpillar catalog:
3693697
LATCH AS
303.5C, 303.5D, 303C CR, 303E CR, 304C CR, 304D CR, 305.5D, 305C CR, 305D CR, 308D, 901C, 902C, 903C
303.5C, 303.5D, 303C CR, 303E CR, 304C CR, 304D CR, 305.5D, 305C CR, 305D CR, 308D, 901C, 902C, 903C
3693699
LATCH AS
303.5C, 303.5D, 303.5E, 303E CR, 304C CR, 304D CR, 304E, 305.5D, 305.5E, 305C CR, 305D CR, 305E
303.5C, 303.5D, 303.5E, 303E CR, 304C CR, 304D CR, 304E, 305.5D, 305.5E, 305C CR, 305D CR, 305E
3693700
LATCH AS
302.5C, 303.5D, 303E CR, 304C CR, 304D CR, 305.5D, 305.5E, 305C CR, 305D CR, 305E
302.5C, 303.5D, 303E CR, 304C CR, 304D CR, 305.5D, 305.5E, 305C CR, 305D CR, 305E
2658460
LATCH AS
303.5C, 303C CR, 304C CR, 305C CR
303.5C, 303C CR, 304C CR, 305C CR
2769279
LATCH AS
303.5C, 303C CR, 304C CR, 305C CR
303.5C, 303C CR, 304C CR, 305C CR
2658460
LATCH AS
303.5C, 303C CR, 304C CR, 305C CR
303.5C, 303C CR, 304C CR, 305C CR
2567506
LATCH AS
302.5C
302.5C
2920451
LATCH AS
301.6C, 302.5C
301.6C, 302.5C
2920450
LATCH AS
301.6C, 302.5C
301.6C, 302.5C
2524481
LATCH AS-DOOR
301.6C, 302.5C
301.6C, 302.5C
2387441
LATCH
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318D, M322C, M322D
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318D, M322C, M322D
3580880
LATCH AS
311D LRR, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 320D, 321D LCR
311D LRR, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 320D, 321D LCR
3623495
LATCH AS-HANDLE
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
2682536
LATCH-LOCK
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
319D, 320C, 322C, 323D L, 323D LN, 324D, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 385C, ...
2857209
LATCH
319D, 320C, 322C, 323D L, 323D LN, 324D, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 385C, ...
319D, 320C, 322C, 323D L, 323D LN, 324D, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 385C, ...
2769279
LATCH AS
303.5C, 303C CR, 304C CR, 305C CR
303.5C, 303C CR, 304C CR, 305C CR