LATCH 2868871 - Caterpillar

Removal Procedure
Start By:
Remove the storage box and covers. Refer to Disassembly and Assembly, "Storage Box and Covers (Cab) - Remove and Install" .
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Illustration 1 g01384408
Remove sheet assembly (1).
Open the engine hood.
Illustration 2 g01216105
Close heater valves (2) and (3).
Illustration 3 g01384409
Disconnect hose assemblies (4) and hoses (5).
Illustration 4 g01213100
Disconnect harness assemblies (7) and (8). Disconnect harness assemblies (10) from clips (9). Remove bolts (6). Position support assembly (11) and harness assemblies (10) to the side.
Illustration 5 g01213102
Illustration 6 g01213132
Remove ducts (12) and (13). Remove cover (14). Disconnect harness assemblies (17), (18), and (19). Remove bolts (16 ). Remove heating and air conditioning unit (15).