parts catalog

LATCH A-HANDLE 2H9771 - Caterpillar

2H9771 LATCH A-HANDLE Caterpillar parts LATCH
Alternative (cross code) number:
Caterpillar 2H9771 LATCH A-HANDLE
Weight: 0.30 pounds 0 kg.

Buy LATCH A-HANDLE 2H9771 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Avoidance zones
A beeper alerts you as the machine approaches an avoidance zone.Avoidance zones are designated areas that you must keep away from. Avoidance zones can be sitewide, or avoidance zones can be specific to a particular design surface. The AccuGrade System provides avoidance zone proximity detection at the bucket tips and at the receivers.Site avoidance zones
When the system is turned on, Site avoidance zones are automatically loaded from the AccuGrade System data card and displayed in the Plan View. Site avoidance zone proximity detection is provided until the Display is turned off. Note: If the Site avoidance zone cannot be loaded, the Display will be turned off. The data card with the avoidance zone must be removed from the Display in order to continue operation. Contact your site supervisor immediately.Design avoidance zones
Design avoidance zones are specific to a design surface. Design avoidance zones load from the AccuGrade System data card as the design is loaded.Design avoidance zones are shown in the Plan View of the Display. Design avoidance zone proximity detection is provided while the design surface remains loaded.Note: If the Design avoidance zone cannot be loaded, the selected design will not be loaded. Select an alternative design surface in order to continue. Contact your site supervisor immediately.No avoidance zone guidance
While any of the following warning messages are displayed, avoidance zone guidance is not given:
"V. Low Accuracy"
"No GPS Data (Left)"
"No GPS Data (Right)"
"Old Position"
"No GPS Receiver Data"
"Invalid GPS Data" If any of the above messages appear, the following warnings are activated:
The "NO AVOID " indicator appears on the guidance screens
The "Avoid. Dist." text item, if configured, appears as N/AFor more information on GPS quality, refer to Operation and Maintenance Manual, "Flashing Messages".Warning levels
As the machine approaches an avoidance zone, three levels of warning are given.Note: Your supervisor can set the warning distance for the avoidance zone. Your supervisor can configure the display in order for you to set the warning distance. This distance can vary with the selected machine type. Ask what the avoidance zone is set to for your machine.First Level Avoidance Zone
If you are within three times the warning distance, the following warnings are activated:
The avoidance zone (1) becomes filled with a magenta color.
If configured, the "Avoid. Dist." (2) text item shows the distance and direction to the closest avoidance zone design boundary.Refer to Illustration 1.
Illustration 1 g01340312
First level avoidance zone warning (1) Highlighted avoidance zone (2) Avoidance zone distanceSecond Level Avoidance Zone
Once you are inside the configured warning distance, the following warnings are activated:
In the Plan View, the machine icon (1) flashes with a warning symbol.
The Avoid indicator (2) appears in the bottom right corner of all guidance screens.
A beeper will beep three times.Refer to Illustration 2.
Illustration 2 g01340340
Second level avoidance zone warning (1) Flashing warning symbol (2) "Avoid" alertThird Level Avoidance Zone
If you enter the avoidance zone:
A flashing message (1) informs you that the machine has entered the avoidance zone. The message "Avoid. Zone Entered" has a yellow background. The message appears in all screens.
A series

Parts latch Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.