LATCH AS 4854793 - Caterpillar

you road a machine, consult your tire dealer for recommended tire pressures and for speed limitations.Turn the saw blade control switch to the OFF position before you road the machine. Put the hydraulic controls lockout lever in the LOCKED position before you road the machine.Limitations for TON-kilometer per hour (TON-mile per hour) must be obeyed. Consult your tire dealer for the speed limit of the tires that are used.When you travel for long distances, schedule stops in order to allow the tires and the components to cool. Stop for 30 minutes after every 40 km (25 miles) or after every hour.Perform a walk-around inspection and measure the fluid levels in each of the compartments.Bring the engine coolant, the crankcase oil, and the transmission oil up to the correct levels.Inflate the tires to the correct pressure.Use a self-attaching inflation chuck in order to inflate the tire. Stand behind the tire tread while you inflate the tires. Reference: For more information, refer to Operation And Maintenance Manual, "Tire Inflation Information".Check with the proper officials in order to obtain the required licenses and other similar items.Travel at a moderate speed. Observe all speed limitations when you road the machine. Carry the work tool as low to the ground as possible.