LEAD ASSEM. 2S2268 - Caterpillar

Remove existing dust ejector group (R5) .Installation Procedure
Illustration 7 g02723636
(R4) Band that retains the tower to the air cleaner (1) 243-5926 Tower
Install tower (15). Use band (R4) in order to retain the tower onto the air cleaner.
Illustration 8 g02723638
(7) 8T-4121 Hard Washer (9) 8T-4136 Bolt (15) 243-5926 Tower (19) 328-2931 Bracket
Use two bolts (9) and two washers (7) to install bracket (19) .
Illustration 9 g02723639
(2) 1W-8620 Check Valve As (7) 8T-4121 Hard Washer (8) 8T-4133 Nut (9) 8T-4136 Bolt
Use bolt (9), two washers (7), and nut (8) in order to install check valve (2) onto bracket (19) .
Illustration 10 g02723641
(3) 5P-0597 Hose Clamp (4) 5P-1471 Hose
Use two hose clamps (3) in order to install hose (4) .
Illustration 11 g02723642
(1) 1S-1668 Tube (3) 5P-0597 Hose Clamp (4) 5P-1471 Hose
Use two hose clamps (3) to install hose (4) and tube (1) .
Illustration 12 g02723898
(3) 5P-0597 Hose Clamp (17) 267-3837 Hose
Use two clamps (3) in order to install hose (17) .
Illustration 13 g02723900
Reinstall any covers or panels that were removed in order to gain access to the air cleaner.
Illustration 14 g02723901
(18) 267-3838 Baffle
Install new baffle (18) .
Illustration 15 g02723902
(5) 7E-3767 Band (7) 8T-4121 Hard Washer (8) 8T-4133 Nut (10) 8T-4182 Bolt (16) 243-5927 Cone
Use band (5) in order to install cone (16) onto the new tower. Use bolt (10), two washers (7), and nut (8) to tighten band (5) .
Illustration 16 g02723904
(6) 8S-1353 Clamp (11) 8T-4223 Hard Washer (12) 8T-4244 Nut (13) 8T-4648 Bolt (14) 208-5836 Precleaner Gp
Install precleaner group (14) onto cone (12). Use clamp (6) to secure the precleaner to the cone. Use bolt (13), washers (11), and nut (12) to tighten the clamp.