LEVELER 1084572 - Caterpillar

Travel Alarm Cancel Switch (14)
Travel Alarm Cancel Switch - This switch is used to stop the travel alarm from sounding. Press the switch to stop the alarm. The indicator lamp will turn on.Note: The travel alarm is located under the cooling package. The travel alarm will sound when the travel lever or the travel pedal is activated.Work Tool Control (15)
Work Tool Control (Switch) - Press this switch to display the selected work tool on the monitor display. Press the switch repeatedly to change the selected work tool.Window Wiper and Window Washer (16-17)
Window Washer (16) - Push the switch to activate the window washer. While the switch is depressed, the indicator light will come on and washer fluid will spray from the nozzle. The window wiper will also operate while the switch is depressed. After the switch is released for approximately 3 seconds, the window wiper will stop.
Window Wiper (17) - Push the switch to activate the window wiper. Whenever the switch is depressed, the mode of the window wiper will change according to the indicator light that is illuminated.6 Second Delay - When the window wiper switch is depressed one time, the first indicator light will turn on. The window wiper will operate intermittently at six second intervals.3 Second Delay - When the window wiper switch is depressed two times, the second indicator light will turn on. The window wiper will operate intermittently at three second intervals.Continuous Operation - When the window wiper switch is depressed three times, the first indicator light and the second indicator light will turn on. The window wiper will operate continuously.OFF - When the window wiper switch is depressed four times, the indicator lights will turn off. The window wiper stops.
If the wiper does not operate with the switch in the ON position, turn the switch off immediately. Check the cause. If the switch remains on, motor failure can result.
If the washer is used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result.
Light Switch (18)
Illustration 13 g02049516
Illustration 14 g02049520
Light Switch - Push the switch to turn on the work lights.Whenever you push the switch, you change the pattern of the work lights that are turned on. The indicator lights in the cab indicate the pattern of the work lights.Pattern 1 - When you press the light switch once, the first indicator light turns on. When the first indicator light is on, the following work lights are turned on: work light (D), which is mounted on the chassis, and work lights (F), which are mounted on the cab.Pattern 2 - When you press the light switch twice, the first indicator light and the second indicator light turn on. When the first indicator light and the second indicator lights are on, the following work lights are turned on: work light (D), which is mounted on the chassis, work lights (F), which are mounted on the cab and work lights (E), which are mounted on the boom.OFF - When