AVSPARE.COM
parts catalog

LEVER A 0544540 - Caterpillar



0544540 LEVER A Caterpillar parts LEVER
Rating:
16
Alternative (cross code) number:
CA0544540
054-4540
0544540
Caterpillar 0544540 LEVER A

Buy LEVER A 0544540 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Image1.1.1
Image 1.2.1 pattern for yoke bolts
1) Use the four old bolts as alignment bolts. Install the old bolts. Tighten the bolts using the pattern in Image1.2.2. Make sure that the yoke is fully seated against the spider. Tighten the 0S-0484 Bolts to a torque of 135 ? 20 Nm (100 ? 15 lb ft).
2) Remove the old bolts one at a time. Follow the pattern in the above illustration. Install the new bolts. Tighten the 0S-0484 Bolts to a torque of 135 ? 20 Nm (100 ? 15 lb ft) before removing the next alignment bolt in the pattern.
3) Recheck the torque of the bolts using the pattern in Image1.2.1.
Driveline Bolt Quantity
Location Bolt Part Number Quantity
Front 0S-0484 4
Center 0S-0484 4
Rear 0S-0484 8
Image1.2.1


Parts lever Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.