LEVER AS 1246209 - Caterpillar

Alarm List Colors Explained
Alarm and shutdown (automatic stop) entries are displayed in red. A warning is displayed in yellow.
New alarms that are not acknowledged, are displayed in bold text. Acknowledged alarms are displayed in normal text.
An alarm that is not acknowledged, then goes inactive, is displayed in normal text on a gray background.Note: Red text color indicates an alarm or shutdown. Yellow text color indicates a warning.
Table 1
Alarm Color Chart    
Alarm or Shutdown     New active alarm     Red background    
Acknowledged active alarm Red background    
Unacknowledged inactive alarm Red text, gray background    
Warning     New active warning     Yellow background    
Acknowledged active warning Yellow background    
Unacknowledged inactive warning Yellow text, gray background    
Diagnostic     New white diagnostic     White background    
Acknowledged white diagnostic White background    
Unacknowledged inactive Diagnostic Black text, gray background    Enter the Alarm List
Illustration 1 g02508601
Press the "Alarm List" button to enter the alarm list. All current alarms are visible on the screen.Press the "Alarm List" button again to exit the alarm list.Silence the Buzzer
If the buzzer sounds, press the "Alarm List" button to silence the buzzer.Note: If not already in the alarm list, pressing the "Alarm List" button will display the alarm list.Note: If the display already shows the alarm list when the buzzer sounds, pressing the "Alarm List" button to silence the buzzer will not cause the display to exit the alarm list. Pressing "Alarm List" button will only silence the buzzer.Acknowledge Alarms
Acknowledge a single alarm.
With the display showing the alarm list, select the alarm to acknowledge by using the arrow buttons. Then, touch the desired alarm that is shown in the list.The selected alarm line will expand to reveal additional information, if any additional information exists.
Press the "Acknowledge" button to acknowledge the selected alarm.Acknowledge All Alarms
With the display showing the alarm list, press and hold the acknowledge button for 1 second to acknowledge all alarms.Note: Alarms that are still active will stay displayed in the screen until the alarms go inactive. Those alarms are shown with a gray background.The Star in the Alarm List
If a star is displayed prior to the engine name, then the RP410 is the active station for that engine.The alarms, with a star prior to the engine name, can be acknowledged with the RP410.Alarms that do not have the star next to the engine name cannot be acknowledged until the RP410 has become the active station for that engine.Filter Alarms
The RP410 can receive alarms from up to eight different DCU panels at one time. Therefore, the process is important to be able to filter alarms.There are two buttons designated for filtering alarms.
Use soft button 2 to filter for engine views.
Use soft button 3 to filter for alarm views. Note: If a filter is applied, then the button is shown with a yellow dot in the button."Engine Views"
Press "Engine Views" for an engine filter selection. The "Engine Views" lists all engines the RP410 is connected to, and also This Station and