LEVER 1333235 - Caterpillar

Illustration 1 g02724838Ejector Control - The joystick control is located on the right side of the operator compartment. The joystick controls the direction and speed of the ejector.
Ejector AUTO RETURN (1) - Push the joystick control to the right, past the DETENT position and allow the joystick to return to the HOLD position in order to turn on the auto return function. Move the joystick control to the left or right in order to turn off the auto return function. When AUTO RETURN is active, an indicator light will illuminate on the front dash. Refer to the “Indicators” topic in Operation and Maintenance Manual, "Monitoring System" for more information.
Ejector RETURN (2) - Push the joystick control partially to the right in order to move the ejector backward. The speed of the ejector will increase as the joystick control is moved further away from the HOLD position up to the DETENT position. The joystick control will return to the HOLD position when the joystick control is released.Ejector HOLD (3) - The joystick control will return to the HOLD position when the joystick control is released. The ejector will remain in the position that is selected.
Ejector FORWARD (4) - Push the joystick control to the left in order to move the ejector forward. The speed of the ejector will increase as the joystick control is moved further from the HOLD position up to the end of joystick travel. The joystick control will return to the HOLD position when the joystick control is released.