LEVER AS 2042733 - Caterpillar

Product Identification Number (PIN) and CE Plate
Illustration 1 g00675011The PIN plate is positioned on the front of the machine, close to the operator compartment.
Illustration 2 g02436556Model number (A)____________________Machine PIN (B)____________________Service Information Plate (C)____________________Year of Manufacture (If Required) (D)____________________CE Plate (If Required) (E)Country of Origin Info Plate (If Required) (F)Local regulation may require documentation of the Year of Manufacture in the OMM. Comply with these regulations.CE Plate
Note: The CE plate is on machines that are going into the European Union.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. Several pieces of information are stamped onto the "CE" plate.
Illustration 3 g01883459For machines that are compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided.
Primary Engine Power (kW)____________________
Additional Engine Power (kW)____________________
Typical Machine Weight (kg)____________________
Year of Construction____________________
Machine Type____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.Machine Specification Film
The machine specification film is on machines that are going into Japan.The Japanese Industrial Safety and Health Act requires machine specifications to be displayed on a film that can easily be seen by the operator.If equipped, this film will be located on the cab door.
Illustration 4 g06178867
Typical example
Electromagnetic Emissions
Note: This label is on machines that are going into Canada.
Illustration 5 g06063443If equipped, this label is located next to the Pin plate. This label verifies that the product meets the requirements of ICES-002 Issue 6. Compliance to ICES-002 Issue 6 is accomplished by meeting electromagnetic emissions industry standard CISPR-12.Engine Serial Number
This label is located on the engine.Engine Serial Number ____________________Sound Certification Film
If equipped, this label is located on the cab door.
Illustration 6 g01082931If equipped, the certification label is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".
Illustration 7 g03105800
(A) Low Noise Film
(B) Super Low Noise FilmIf equipped, these certification labels are used to verify the Japan Ministry of Land, Infrastructure, Transportation, and Tourism (MLIT) noise designation according to the Japan "Designation Rule of Low Noise Type Contrsuction Machine".Low Noise (A) - Verifies that the Japan "MLIT" designates the machine as a "Low Noise" type construction machine.Super Low Noise (B) - Verifies that the Japan "MLIT" designates the machine as a "Super Low Noise" type construction machine.