2278348 LEVER AS Caterpillar parts
D6R, D6R II, D6R III, D6R STD, D6T, D7R II, D7R XR
Rating:
Alternative (cross code) number:
CA2278348
227-8348
2278348
CA2278348
227-8348
2278348
Weight: 1 pounds 0 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 2278348:
Caterpillar parts catalog:
Information:
Removal Procedure
Start By:
Remove the prelubrication oil pump. Refer to Disassembly and Assembly, "Prelubrication Oil Pump - Remove".
Install the engine lifting brackets. Refer to Disassembly and Assembly, "Engine Lifting Bracket - Remove and Install".Note: This procedure can only be performed when the engine is removed from the base.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00553584
Typical Example
Illustration 2 g00553585
Typical Example
Remove the bolts and clamps that hold the tube assembly to engine oil pan (4) .
Remove bolts (2) . Remove spacer (1) . Remove the tube assembly from engine oil pan (4) and the engine oil pump.
Ensure that all connections between the cylinder block and engine oil pan (4) have been removed.
Attach a suitable lifting device to the engine lifting brackets. The weight of the 3608 Engine is approximately 19000 kg (41900 lb). Remove bolts (3) that hold engine oil pan (4) to the cylinder block and the end covers. Remove the engine from the base.
Place the engine on support blocks. The minimum height of the stands should be 671 mm (26.4 inch) for the removal of the engine oil pan.
Illustration 3 g00553586
Place a pallet jack under each end of engine oil pan (4) . The weight of the 3608 engine oil pan is approximately 737 kg (1625 lb).
Raise the pallet jacks in order to support engine oil pan (4) .
Illustration 4 g00553587
Remove gasket (5) from engine oil pan (4) .
Start By:
Remove the prelubrication oil pump. Refer to Disassembly and Assembly, "Prelubrication Oil Pump - Remove".
Install the engine lifting brackets. Refer to Disassembly and Assembly, "Engine Lifting Bracket - Remove and Install".Note: This procedure can only be performed when the engine is removed from the base.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00553584
Typical Example
Illustration 2 g00553585
Typical Example
Remove the bolts and clamps that hold the tube assembly to engine oil pan (4) .
Remove bolts (2) . Remove spacer (1) . Remove the tube assembly from engine oil pan (4) and the engine oil pump.
Ensure that all connections between the cylinder block and engine oil pan (4) have been removed.
Attach a suitable lifting device to the engine lifting brackets. The weight of the 3608 Engine is approximately 19000 kg (41900 lb). Remove bolts (3) that hold engine oil pan (4) to the cylinder block and the end covers. Remove the engine from the base.
Place the engine on support blocks. The minimum height of the stands should be 671 mm (26.4 inch) for the removal of the engine oil pan.
Illustration 3 g00553586
Place a pallet jack under each end of engine oil pan (4) . The weight of the 3608 engine oil pan is approximately 737 kg (1625 lb).
Raise the pallet jacks in order to support engine oil pan (4) .
Illustration 4 g00553587
Remove gasket (5) from engine oil pan (4) .
Parts lever Caterpillar catalog:
4M1853
LEVER AS-SHIFT
1090, 1140, 1150, 1160, 1190, 1190T, 120M, 120M 2, 1290T, 12E, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 1673, 1673B,...
1090, 1140, 1150, 1160, 1190, 1190T, 120M, 120M 2, 1290T, 12E, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 1673, 1673B,...
9M7394
LEVER
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 16, 160G, 160H, 160H ES, 160H N...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 16, 160G, 160H, 160H ES, 160H N...
1601433
LEVER
572R II, 583T, 587T, D10T, D11T, D6R II, D6R III, D6T, D7R II, D8R II, D8T, D9T, PL83, PL87
572R II, 583T, 587T, D10T, D11T, D6R II, D6R III, D6T, D7R II, D8R II, D8T, D9T, PL83, PL87
1601434
LEVER
572R II, 583T, 587T, D10T, D11T, D6R, D6R II, D6R III, D6R STD, D6T, D7R II, D7R XR, D8R II, D8T, D9T, PL83, PL87
572R II, 583T, 587T, D10T, D11T, D6R, D6R II, D6R III, D6R STD, D6T, D7R II, D7R XR, D8R II, D8T, D9T, PL83, PL87
6E1134
LEVER
D6N, D6T, D8N, D8R, D8R II, D9R
D6N, D6T, D8N, D8R, D8R II, D9R
1747044
LEVER
D6R II, D6R III, D7R II
D6R II, D6R III, D7R II
1669211
LEVER
D6R II, D6R III, D7R II
D6R II, D6R III, D7R II
8P4233
LEVER
572G, D6R III
572G, D6R III
3173933
LEVER
D6R, D6R STD, D7R XR
D6R, D6R STD, D7R XR
1882893
LEVER AS-GATE
D7R, D7R II, D7R XR, D8R II
D7R, D7R II, D7R XR, D8R II
1999203
LEVER GP-CONTROL VALVE
D7R II, D8R II
D7R II, D8R II
1437746
LEVER
D7R II, D8R II
D7R II, D8R II
1965515
LEVER AS
D6R, D6R II, D6R III, D6R STD, D6T, D7R II, D7R XR, D8R II
D6R, D6R II, D6R III, D6R STD, D6T, D7R II, D7R XR, D8R II
1999710
LEVER AS
D6R II, D6T, D7R, D7R II, D8R II
D6R II, D6T, D7R, D7R II, D8R II
1240562
LEVER AS
953C, 963C, 973C
953C, 963C, 973C
1557684
LEVER AS
953C, 963C, 973C
953C, 963C, 973C
1269058
LEVER
953C, 963C, 973C
953C, 963C, 973C
3W2390
LEVER
963, 963B, 973
963, 963B, 973
8G1563
LEVER
963, 963B, 973
963, 963B, 973
8G1564
LEVER
963, 963B, 973
963, 963B, 973
2835546
LEVER AS
953D, 963D, 973D
953D, 963D, 973D
2617382
LEVER AS
953D, 963D, 973D
953D, 963D, 973D
1669212
LEVER
D6R, D6R II, D6R III, D6R STD, D7R II, D7R XR
D6R, D6R II, D6R III, D6R STD, D7R II, D7R XR