LEVER 2D4775 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Illustration 1 g06252448
Cab group
(A) 336-6672 Handle As
(B) 8T-4138 BoltThe handle assembly (A) for the cab door group may experience linkage failure due to screws loose. Two bolts on top of the handle may loosen at times, causing the handle to break or latch in the cab door may not function properly.Solution
If the handle assembly (A) found loose or damaged, replace 336-6672 Handle As. with the same part number. Tighten all four bolts (B) that secure handle assembly (A) to a torque of 6 N m (53 lb in).Note: Medium strength Loctite can be used to maintain the joint integrity.