LEVER ASSEM. 2G1751 - Caterpillar

Remove piston assemblies (15) and the retainer from barrel assembly (16).
Illustration 13 g02672921
Remove retaining ball (17) from barrel assembly (16).
Illustration 14 g02672924
Illustration 15 g02672956
Sudden release of spring force can cause injury.To prevent the possibility of injury, follow the procedure to relieve the spring pressure.
Use a suitable press and Tooling (A) to compress spring (20) in barrel assembly (16).
Remove retaining ring (21) from barrel assembly (16).
Remove spring (20), guide (19), and pins (18) from barrel assembly (16).
Illustration 16 g02672980
Remove control piston (22).
Illustration 17 g02672983
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: To release piston rod (23) from the swashplate, lift the swashplate a little and move the piston rod sideways.
Remove piston rod (23).
Illustration 18 g02673016
Remove swashplate (24).
Illustration 19 g02673039
Remove spring (25).
Illustration 20 g02673044
Remove bearings (26).
Illustration 21 g02673056
Remove shaft assembly (27).
Illustration 22 g02673076
Remove retaining ring (28) and lip seal (29).
Illustration 23 g02673116
Remove plugs (30) and the O-ring seals from pump body (5).
Illustration 24 g02673122
Remove bearing cup (31) from pump body (5).
Illustration 25 g06227585
Use Tooling (B) and a suitable press to remove bearing cone (32) from shaft assembly (27).